we received two new XCVR2450 boards today (serial ~1390), and it seems
they refuse to work out of the box. I tested the boards both with UHD
and raw ethernet firmware+FPGA, the board both are unable to tune to
different frequencies, or any frequency for that matter. The
usrp2_fft.py script complains that it failed to set the frequency, an
older board works with the same code (serial ~700).
For UHD, it identifies the boards correctly, but it looks like the
attached picture everywhere, with or without antenna
Did something change in the way to handle the boards?
we received two new XCVR2450 boards today (serial ~1390), and it seems they refuse to work out of the box. I tested the boards both with UHD and raw ethernet firmware+FPGA, the board both are unable to tune to different frequencies, or any frequency for that matter. The usrp2_fft.py script complains that it failed to set the frequency, an older board works with the same code (serial ~700).
Due to size issues, the xcvr handling had to be moved into its own image
for the gnuradio usrp2 drivers. Did you use the xcvr-specfic firmware
image?
