I have an application that requires transmitting at 2287.5 MHz.
Can the GR3.6.1/UHD/USRP2/WBX combination tune to that freq?
I know it’s above the published range for the WBX (2200 Mhz)
but these ranges are often rounded.
Assuming the WBX will/can get there (Matt?), is there any
limit checking in the daughtercard driver sw that hard limits
the WBX to 2200 MHz?
The daughterboard code does some limit checking, so you would want to
disable that in uhd/host/lib/usrp/dboard/db_wbx_versionX.cpp (where X
is the version of the board you have).
Some boards will tune further than 2.2 GHz, but it will vary. 80 MHz
might be a bit far for it, but you can try. Remember also that you
get another 20 MHz from the baseband tuning, so you only need to tune
the LO to about 20 MHz lower than your highest frequency. You might
only need to get to 2267.5 MHz.
Matt
On Sat, Aug 25, 2012 at 1:17 PM, Ed Criscuolo
This forum is not affiliated to the Ruby language, Ruby on Rails framework, nor any Ruby applications discussed here.