Usrp2

GNU Radio
1

Hi All;

      I am new about gnuradio. I tried in Beagleboard . It cause a

problem with prims library. I hope I will solve with appliying libusb
patch
in open embedded. But I have also USRP2 and I am unable to compile it.
Can
USRP2 work on BeagleBoard (Omap3,arm7) ?

2

On 01/21/2010 08:15 AM, halidziya yerebakan wrote:

Hi All;

       I am new about gnuradio. I tried in Beagleboard . It cause a

problem with prims library. I hope I will solve with appliying libusb patch
in open embedded. But I have also USRP2 and I am unable to compile it. Can
USRP2 work on BeagleBoard (Omap3,arm7) ?

The main problem using a USRP2 with a Beagleboard (or other small hw)
will be finding a suitable Gig-E interface.

Philip

PS: Must remember to hit reply all when replying to messages on
discuss-gnuradio …

3

I don’t know have to use mail list sorry. Is it Ok now ? My converter is
Slink SL-U85 but I am unable to find its documentation.

4

Are you using Angstrom ? Is it working with Angstrom repository’s files
?

5

On 01/22/2010 01:53 AM, halidziya yerebakan wrote:

I don’t know have to use mail list sorry. Is it Ok now ? My converter is
Slink SL-U85 but I am unable to find its documentation.

The email list problem I was referring to was my failure to remember to
hit reply-all when replying to emails on this list :slight_smile:

I could not find much information on the adapter you mentioned, but my
understanding is the USRP2 requires a gig-E adapter at the host
computer, 10/100 adapters will not work.

Since USB is slower than Gig-E I don’t expect many, if any, USB to
ethernet adapters to support Gig-E

Philip