USRP2 kit is not detected by desktop's ethernet port at all

GNU Radio
1

Hi,

We installed the latest UHD-003.005.003 with gnuradio-3.6.4.1 on a
32-bit
PC running Ubuntu 11.04, but the USRP2 kit is just not getting detected
(the green LED near the ethernet port of the USRP2 kit does not glow).

We even tried gnuradio-3.6.0 and UHD-003.005.002 yet there is no change
at
all.

We are using a Gigabit ethernet cable, but we are not sure if the
desktop’s
ethernet interface supports gigabit transmission.

Meanwhile, on a macbook pro (running Mac OS X Lion with neither Gnuradio
nor the UHD installed), the USRP2’s ethernet port green LED was glowing.

Thanks,

swrangsar

2

Swrangsar,

For checking desktop’s ethernet interface speed u can use ethtool

sudo apt-get install ethtool
ethtool eth0

-Adeel

On Fri, May 24, 2013 at 1:10 PM, swrangsar basumatary

3

So I guess you have a PC problem, not a USRP problem.

Ralph.

From: discuss-gnuradio-bounces+ralph=removed_email_address@domain.invalid
[mailto:discuss-gnuradio-bounces+ralph=removed_email_address@domain.invalid] On Behalf Of
swrangsar basumatary
Sent: Friday, May 24, 2013 10:10 AM
To: [email protected]
Subject: [Discuss-gnuradio] USRP2 kit is not detected by desktop’s
ethernet
port at all

Hi,

We installed the latest UHD-003.005.003 with gnuradio-3.6.4.1 on a
32-bit PC
running Ubuntu 11.04, but the USRP2 kit is just not getting detected
(the
green LED near the ethernet port of the USRP2 kit does not glow).

We even tried gnuradio-3.6.0 and UHD-003.005.002 yet there is no change
at
all.

We are using a Gigabit ethernet cable, but we are not sure if the
desktop’s
ethernet interface supports gigabit transmission.

Meanwhile, on a macbook pro (running Mac OS X Lion with neither Gnuradio
nor
the UHD installed), the USRP2’s ethernet port green LED was glowing.

Thanks,

swrangsar