Have USRPn210 with SBX daugtherboard. I installed the gnuradio and Uhd.
But have problem that the PC not see the USRP. i edit the ips to make
the device 192.168.10.2 and same problem. so, can any one help me to
connect the USRP with the PC( the IP , DNS, and the Default gatway).
The last device I received did not appear to have the correct IP set
from the factory.
I had to reset using the “Device recovery and bricking” procedure here:
and set the IP using the “Change the USRP2’s IP address” section from
the same page.
On Thu, Aug 01, 2013 at 12:35:42AM -0700, Mohammed R. wrote: