Hi,
To begin with, congratulations and thanks to all those involved in
getting JRuby in its current state. It’s amazing how much you have
achieved in just a few years. Hats off.
I’m trying to get Rcov running in conjunction with my JRuby based specs.
The instructions on the JRuby wiki [1] are very clear, but fail me at
this step:
jruby -S rake gem
with a
rake aborted!
Don’t know how to build task ‘gem’
Probably some simple setup issue. Any hints are welcome.
Menno
[1] http://kenai.com/projects/jruby/pages/RCov
To unsubscribe from this list, please visit:
http://xircles.codehaus.org/manage_email
Hi.
On May 23, 2009, at 9:25 AM, Menno Jonkers wrote:
[1] http://kenai.com/projects/jruby/pages/RCov
I don’t know why the rake task is not there, but you can use gem
directly against gemspec:
$ jruby -S gem build rcov.gemspec
JRuby limited openssl loaded. gem install jruby-openssl for full
support.
http://wiki.jruby.org/wiki/JRuby_Builtin_OpenSSL
WARNING: no rubyforge_project specified
Successfully built RubyGem
Name: rcov
Version: 0.8.2.1
File: rcov-0.8.2.1.gem
To unsubscribe from this list, please visit:
http://xircles.codehaus.org/manage_email
Hirotsugu A. wrote:
I don’t know why the rake task is not there, but you can use gem
directly against gemspec:
[…]
That did it! Thanks a lot.
Menno
To unsubscribe from this list, please visit:
http://xircles.codehaus.org/manage_email
Menno Jonkers wrote:
Hirotsugu A. wrote:
I don’t know why the rake task is not there, but you can use gem
directly against gemspec:
[…]
That did it! Thanks a lot.
FWIW, if you want to run the jruby fork of RCov, you can just:
gem install --source http://gems.github.com jruby-rcov
We’re hoping to keep that a maintained version into the future.
To unsubscribe from this list, please visit:
http://xircles.codehaus.org/manage_email