USB-3 40MHz BW 300MHz -3.8GHz SDR Transceiver 400 USD

For those who didnt see it yet.

http://www.kickstarter.com/projects/1085541682/bladerf-usb-30-software-defined-radio

How about these guys ? http://www.thinkrf.com/products.html

They already have a GNURadio compliant product line.

From: discuss-gnuradio-bounces+bill.pretty=removed_email_address@domain.invalid
[mailto:discuss-gnuradio-bounces+bill.pretty=removed_email_address@domain.invalid] On
Behalf
Of Edmund Humenberger
Sent: Wednesday, January 30, 2013 7:54 AM
To: [email protected]
Subject: [Discuss-gnuradio] USB-3 40MHz BW 300MHz -3.8GHz SDR
Transceiver
400 USD

For those who didnt see it yet.

http://www.kickstarter.com/projects/1085541682/bladerf-usb-30-software-defin
ed-radio


No virus found in this message.
Checked by AVG - www.avg.com
Version: 2013.0.2890 / Virus Database: 2639/6065 - Release Date:
01/29/13

On Wed, Jan 30, 2013 at 12:49 PM, Martin O’Shield
[email protected]wrote:

of 100 kHz to 10 GHz and capable of processing up to 450 MHz of
instantaneous RF bandwidth.

All Impressive INDEED!

I wonder what the pricing for ThinkRF products are and what will the
BladRF USB
be priced at?

The bladeRF is definitely nowhere close to what the thinkRF folks are
doing

  • but the market segments are different as well. The thinkRF guys are
    much
    more into high performance/SIGINT whereas bladeRF is good performance
    and
    highly integrated yielding a lower cost at the sacrifice of bandwidth.

The bladeRF is based on the LMS6002D RF transceiver with documentation
here:

GitHub - chemeris/lms6002-documentation: Documentation for LMS6002D single chip transceiver, released by Lime Microsystems for open-source use

The $400 price tag along with the 300MHz - 3.8GHz tuning range, 28MHz of
instantaneous bandwidth and bus powered over USB 3.0 superspeed to get
5Gbps full duplex are the biggest selling points. Full schematics can
be
found on the support page or directly:

http://nuand.com/bladerf.pdf

It’s a good SDR for a very palatable price.

Brian

William,

Thanks for making me aware of this:

100Khz - 20Ghz for their SDR boards, but their Front ends are:

RFE0108 100 kHz to 10 GHz Radio Front End
High performance radio receiver front end with frequency tuning range
of
100 kHz to 10 GHz and capable of processing up to 450 MHz of
instantaneous
RF bandwidth.

All Impressive INDEED!

I wonder what the pricing for ThinkRF products are and what will the
BladRF
USB
be priced at?

That is the question, but ALL gorgeous stuff no doubt!

Sincerely,

Martin

On Wed, Jan 30, 2013 at 11:37 AM, William Pretty Security <

On Wed, Jan 30, 2013 at 01:18:46PM -0500, Brian P. wrote:

[stats about hw]

I’d like to remind people of the
http://gnuradio.org/redmine/projects/gnuradio/wiki/Hardware
wiki page, which tries to collect a list of GNU Radio-friendly
hardwares, as well as the fact that anyone can edit this page :slight_smile:

MB

Karlsruhe Institute of Technology (KIT)
Communications Engineering Lab (CEL)

Dipl.-Ing. Martin B.
Research Associate

Kaiserstraße 12
Building 05.01
76131 Karlsruhe

Phone: +49 721 608-43790
Fax: +49 721 608-46071
www.cel.kit.edu

KIT – University of the State of Baden-Württemberg and
National Laboratory of the Helmholtz Association