I am attempting to transmit a simple sinusoidal signal generated by GNU
radio. The signal would be transmitted by RFX 2400 connected to one
computer and the transmitted signal would be received by RFX2400
connected to another computer. Basically the signal would be sent
wirelessly from one computer to the other.
The question that I have is that when I send the signal is there a
default modulation taking place. If yes then what is it? If not then
what options do I have for sending the signal and receiving the signal?
On 1/31/08, Patel, Tushar P [email protected] wrote:
The question that I have is that when I send the signal is there a default
modulation taking place. If yes then what is it? If not then what options do
I have for sending the signal and receiving the signal?
Are you using the usrp_siggen.py example script? If so, pass -w0, to
set the modulation frequency to zero. Then you will just see a
carrier. Otherwise, you’ll need to tell us more about what you are
doing to send and receive.
–
Johnathan C.
Corgan Enterprises LLC
http://corganenterprises.com/