Hello,
I am sending 802.11 packet using “tx_waveforms”
I have modified the code to read samples from a file.
The file is 2560000 samples for 1000 802.11 packets.
When I give 0 sec delay, gnuradio transmits packets and I have receive
the
packets from my laptop in monitor mode.
But if I give any delay, the packet seems not transmitted nor delayed.
root@node1-2:~/git/uhd/host/build/examples# ./tx_waveforms --args
addr=192.168.10.2 --freq 2427e6 --nsamps 2560001 --txrate 20e6 --gain 15
–secs 2
linux; GNU C++ version 4.4.1; Boost_103800;
UHD_0001.20101229023217.253ac61
Creating the usrp device with: addr=192.168.10.2…
Current recv sock buff size: 50000000 bytes
Using Device: Single USRP:
Device: USRP2/N Series device
Mboard: USRP2-REV3 mboard
RX DSP: USRP2-REV3 ddc0
RX Channel: 0
RX Dboard: USRP2-REV3 dboard (rx unit)
RX Subdev: XCVR2450 (0x0061)
TX DSP: USRP2-REV3 duc0
TX Channel: 0
TX Dboard: USRP2-REV3 dboard (tx unit)
TX Subdev: XCVR2450 (0x0060)
Setting TX Rate: 20.000000 Msps…
Actual TX Rate: 20.000000 Msps…
Setting device timestamp to 0…
Read data to send from file: in.dat
Number of samples in file: 2560001
Sent 257382 samples
Done!
–
*From: Sangho Oh
*
Voice mail: (609) 759-1552