The USRP2 is not recognized by the computer

GNU Radio
1

Hi all

I am new to gnuradio and Ubuntu. I am trying to install the GNU Radio
and am
following the procedure in gnuradio.org. I am at the point where I am
checking
to see if the USRP2 is recognized by the computer. When I enter the
command:
ls -lR /dev/bus/usb | grep usrp
I don’t get a response. Please Help.

Mark

2

Hi,

the USRP2 uses ethernet to communicate with the host, I think you are
following the USRP1 procedure, it connects via USB to the host.

Try the following:
http://gnuradio.org/redmine/wiki/gnuradio/USRP2UserFAQ#Any-hints-for-getting-started-In-particular-what-needs-to-be-done-to-talk-to-the-usrp2-via-the-ethernet

you must take care that you use the correct ethernet device, eth0, eth1,
…; you can check with ifconfig.

Matthias

Am 06.08.2010 um 13:56 schrieb Mark Hemmerlein: