Setting up the USRP

GNU Radio
1

We are putting a new USRP module in service. Is there some firmware
setup required,
and if so what is the procedure. The ‘manual’ mentions if the LED is
blinking in a
certain way, that the firmware has not been loaded, but there’s doesn’t
seem to
be a paragraph on how to load the firmware.

Thanks
John C…

2

John C. wrote:

We are putting a new USRP module in service. Is there some firmware
setup required,
and if so what is the procedure. The ‘manual’ mentions if the LED is
blinking in a
certain way, that the firmware has not been loaded, but there’s
doesn’t seem to
be a paragraph on how to load the firmware.
The firmware is loaded automatically whenever you run any of the
utilities/scripts/etc that use the USRP, e.g. test_usrp_standard_rx in
the usrp/host/apps directory.

-Dan

3

Dan H. schrieb:

The firmware is loaded automatically whenever you run any of the
utilities/scripts/etc that use the USRP, e.g. test_usrp_standard_rx in
the usrp/host/apps directory.

Yeah, I just tried the test_… and it seems to work. I don’t know what
caused the crash on
the first round…

Thanks
John C…