Hi all,
I am facing “Segmentation Fault” error.
My setup is - Ubuntu 11.04, USRP2 with WBX board, gnuradio.
The scenario is - When I run uhd_fft.py, I get the following -
(gdb) run /usr/local/bin/uhd_fft.py
Starting program: /usr/bin/python /usr/local/bin/uhd_fft.py
[Thread debugging using libthread_db enabled]
linux; GNU C++ version 4.5.2; Boost_103700; UHD_003.003.000-25f0bd5
[New Thread 0x7fffe1adf700 (LWP 26034)]
[New Thread 0x7fffe12de700 (LWP 26035)]
usrp_source make
Making
– Opening a USRP2/N-Series device…
[New Thread 0x7fffe0add700 (LWP 26036)]
UHD Warning:
The recv buffer could not be resized sufficiently.
Target sock buff size: 50000000 bytes.
Actual sock buff size: 131071 bytes.
See the transport application notes on buffer resizing.
Please run: sudo sysctl -w net.core.rmem_max=50000000
UHD Warning:
The recv buffer could not be resized sufficiently.
Target sock buff size: 50000000 bytes.
Actual sock buff size: 131071 bytes.
See the transport application notes on buffer resizing.
Please run: sudo sysctl -w net.core.rmem_max=50000000
UHD Warning:
The send buffer could not be resized sufficiently.
Target sock buff size: 1048576 bytes.
Actual sock buff size: 131071 bytes.
See the transport application notes on buffer resizing.
Please run: sudo sysctl -w net.core.wmem_max=1048576
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7fffe0add700 (LWP 26036)]
0x00007ffff57d6973 in std::_Rb_tree_increment(std::_Rb_tree_node_base*)
()
from /usr/lib/x86_64-linux-gnu/libstdc++.so.6
(gdb) backtrace
#0 0x00007ffff57d6973 in
std::_Rb_tree_increment(std::_Rb_tree_node_base*)
()
from /usr/lib/x86_64-linux-gnu/libstdc++.so.6
#1 0x00007ffff419bc68 in tls_destructor ()
from /usr/lib/libboost_thread.so.1.42.0
#2 0x00007ffff419e177 in thread_proxy ()
from /usr/lib/libboost_thread.so.1.42.0
#3 0x00007ffff7bc4d8c in start_thread ()
from /lib/x86_64-linux-gnu/libpthread.so.0
#4 0x00007ffff6a8a04d in clone () from /lib/x86_64-linux-gnu/libc.so.6
#5 0x0000000000000000 in ?? ()
(gdb)
The UHD logs file has been attached with the mail.
Also, USRP1 with uhd_fft.py is working fine. USRP2 works fine if there
is no
UI involved (that is - /usr/local/share/uhd/examples/rx_ascii_art_dft
–freq 900e6 --rate 1e6 --dyn-rng 120 works fine).
Can some one please take a look at this problem?
Thanks,
Sriharsha P…