Ruby/XSLT

Rails
1

Anybody got any experience using this (
http://greg.rubyfr.net/pub/packages/ruby-xslt/files/README.html ) ? I
asked my hosting company (a2hosting.com) about XSLT processors for Rails
and mentioned this one. Four hours later I get email that they’ve
installed it. Thing is, the documentation didn’t generate, and when I
execute ‘gem list --local’ it’s not listed as an installed gem.

Any info would really be appreciated.

Thanks,
Bill

2

Hello Bill,
Well, from the completely cursory glance given to it, it appears to
be a front end to libxslt. Basically, when I did this in perl (don’t
hate ;), it was pretty much the same. Have your ruby program ‘open’ the
xml source file, open the xslt, apply the xslt (using the serve function
here) and then print out the output.

What more info do you need ? (Honestly asked btw)
Regards
Stef

(ps. as with anything XSLT related, your going to spend about 4 days
getting your stylesheet correct, and 1 minute on the transformation
itself :wink:

3

Agreed,

Making the xslt’s will be the longest process, especially if you are new
to
it.

Some books:
I would suggest picking up XSLT by WROX
And of course the pocket reference by orielly

If you need some help I wouldn’t mind helping as I would like to look
into
how ruby handles xml/xslt

4

Hi Stef,

Thanks for your response! I’m going to change-up the order below a
little
to make my reply read more easily.

Stef T wrote:

What more info do you need ? (Honestly asked btw)

I always presume goodwill :wink:

Well, from the completely cursory glance given to it, it appears to be
a front end to libxslt.

And on libxml. Are either / both of these included in Ruby or Rails?
If
so, which one?

Have your ruby program ‘open’ the xml source file, open the xslt, apply
the xslt (using the serve function here) and then print out the output.

I’m already wondering about the ‘print out the output’ part. As a test,
I
took a sample XML file and embedded the reference to the XSL file in it
(
adding <?xml-stylesheet type=“text/xsl”
href=“stylesheets\ccr_xslt\ccr_20060328.xsl”?> as the second line of the
file). Both FF and IE6 support this level of XSLT natively and opening
the
XML file with either browser renders a correctly styled HTML page.

OTOH, when I do a ‘render :file => “same XML file”’ via my Rails
controller,
the page renders but does not have the XSL applied. If I do the render
:file on the translated HTML file, it renders that OK. I don’t
understand
this and it worries me a little. Based on the browsers’ behavior when I
open the file through the File menu, it seems like this ought to work
via
the render :file if Rails just passed the XML file through to the
browser.
Any thoughts / ideas on what might be going on here and/or how to fix it
would be greatly appreciated!

Best regards,
Bill

5

Hello Bill :slight_smile:

Bill W. wrote:

What more info do you need ? (Honestly asked btw)

I always presume goodwill :wink:

good way to be, a very good way, sometimes painful, but, smiles good
show :slight_smile:

Well, from the completely cursory glance given to it, it appears
to be a front end to libxslt.

And on libxml. Are either / both of these included in Ruby or Rails?
If so, which one?

If you mean are ‘libxml’ or ‘libxslt’ included in RoR, then no. These
are linux libraries. If you mean the ‘ruby wrappers’ (ruby-xml) come as
‘standard’, then no, however, there is a way to have rails generate out
xml by using a .rxml file. Have a look around
http://wiki.rubyonrails.org/rails/pages/HowtoGenerateXml :wink:

HTML page.

Well, now, this is the interesting part :slight_smile: Ideally, there should be a
sort of ‘:after_filter’ on the method that you use to generate the XML.
Inside the :after_filter, you would load the stylesheet in much the same
way that the ruby-xsl shows. This way, your still using rails and you
have set the ‘filter’ to perform after the generation (so in the future,
if someone needs the un-translated XML, then can get it). The header
content-type would be different, but, you could probably change that
without too much trouble in the :after_filter …

Thats my thinking. I am unsure if IE/FF include libxslt in there by
default, but, leaving this to the individual browser to deal with is
dangerous at best. Mean to say, your assuming that all XSLT engines will
follow ‘the standard’, whereas if you do the transformation yourself, at
least you know that the -exact- -same- structure of results is sent to
all clients.

Hopefully this makes sense, and I am interested in the solution you go
with. If its sufficiently ‘weird’, this could be a great problem to
distrac… urm… occupy my work time tomorrow :wink:

Regards as always
Stef

6

Hi Clayton,

Clayton C. wrote:

Making the xslt’s will be the longest process,
especially if you are new to it.

‘Luckily’, the XSLT’s been furnished. All I have to do is make it work
:wink:

Some books:
I would suggest picking up XSLT by WROX
And of course the pocket reference by orielly

I picked up the ‘XSLT Quickly’ from Manning a few weeks ago to get me
started. Thanks for the suggestions, though, as (assuming I can get
this
working) I’ll be adding to that shorthly.

If you need some help I wouldn’t mind helping as I
would like to look into how ruby handles xml/xslt

Excellent!!! Please consider yourself asked. I’ve got a feeling I’m
definitely going to need some help on this. The biggest potential
problem
I’m looking at at the moment is that I’m using InstantRails on WinXP for
development. I was able to get my host (a2hosting.com) to install the
Ruby/XSLT gem for me, but the documentation didn’t gen. In fact, when I
run
‘gem list --local’ I don’t even see it.

I’ll contact you off-list. Thanks for offering.

Best regards,
Bill

7

Clarification for a poorly worded question …

And on libxml. Are either / both of these included
in Ruby or Rails?

If so, are they part of Ruby or Rails (so I’ll know which documentation
to
focus on) ?

Thanks,
Bill

8

Hi Stef,

Thanks for your reply.

Stef T wrote:

If you mean are ‘libxml’ or ‘libxslt’ included in RoR, then no. These are
linux libraries. If you mean the ‘ruby wrappers’ (ruby-xml) come as
‘standard’, then no, however, there is a way to have rails generate out
xml by …

I’m using Builder to generate the XML file.

Well, now, this is the interesting part :slight_smile: Ideally, there should be a sort
of ‘:after_filter’ on the method that you use to generate the XML. Inside
the :after_filter, you would load the stylesheet in much the same way that
the ruby-xsl shows.

I’m not understanding the processing you describe in the :after_filter.
Load the stylesheet into what for use how? Are you saying I can just
reference it with a stylesheet_tag or something and that somehow Rails
would
then be able to handle it without an XSLT processor?

leaving this to the individual browser to deal with is dangerous at best.
Mean to say, your assuming that all XSLT engines will follow ‘the
standard’, whereas if you do the transformation yourself, at least you
know that the -exact- -same- structure of results is sent to all clients.

Agreed. That’s why I’m trying to get an XSLT processor working on my
hosted
site. In the meantime, I thought I’d see if I could just get Rails to
pass
everything to the browser so I could at least get the results I get from
the
browser’s File menu. No joy. Let me know if you’re interested and I’ll
be
more than happy to send you the XML and XSL files so you can see where
I’m
having trouble understanding what Rails is doing.

Thanks again!

Best regards,
Bill

9

Hey Bill :slight_smile:

Thanks for your reply.

Oh. you say that now, jst wait until you hear my solution :stuck_out_tongue: (joking, I
hope :wink:

Okay, well, in actioncontroller there is a way to ‘hook in’ processing
-after- a method has been called, jst before it returns the information
to the user (or the webpage to the browser if you prefer). This is done
by using the :after_filter. So, if you include the XSLT transformation
in there, then it will be called after everything else but before the
page is returned :slight_smile:

I would -assume- something like

class blah < ActionController::Base

require 'xml/xslt'

after_filter :transformXMLUsingXSLT

def myFunkyXMLGeneration
   # generate the XML page here
end

private
def transformXMLUsingXSLT
        # Should probably check the content header for XML ;P
        xslt = XML::XSLT.new()
        xslt.xml = @content
        xslt.xsl = "mytest.xsl"
        response.content = xslt.serve()
end

end

This is by NO means -definitive- but, you should get an idea of what I
am driving at here ;>

you’re interested and I’ll be more than happy to send you the XML and
XSL files so you can see where I’m having trouble understanding what
Rails is doing.

Understandable, truly. The amount of times I have to try and thunk my
head around why something is designed the way it is, is normally the
part that takes ‘time’ :slight_smile:

This is also in best interest’s to fix, as even though I don’t need this
right at this moment, I can see the need arising rather shortly where I
work :wink:

Regards
Stef

10

Bill W. wrote:

Four hours later I get email that they’ve
installed it. Thing is, the documentation didn’t generate, and when I
execute ‘gem list --local’ it’s not listed as an installed gem.

It hasn’t been gemified. I just started using this too and really wish
there was a gem for deployment purposes.

Last month Chad F. gave a talk on making gems at our local Ruby
Users Group. Maybe I’ll try my hand at gemifying it.

Otherwise, any volunteers? :slight_smile: