Thanks for the advice. I don’t think that’s my only problem though. My
vector is currently supposed to produce 2500 samples. This combined with
an interpolation factor of 512, should give me 10 msecs of signal. Have
I calculated this correctly? Also, I’m using the gr.modulation block to
make the signal, but if it is producing complex output, does that mean
I’m actually sending 5000 samples?
At the moment, sending my 2500 samples produces an output only 1 msec
----- Original Message ----
From: Eric B. firstname.lastname@example.org
To: seph 004 email@example.com
Cc: David S. firstname.lastname@example.org;
Sent: Friday, March 2, 2007 7:06:06 PM
Subject: Re: [Discuss-gnuradio] The shortest pulse length
On Fri, Mar 02, 2007 at 12:41:40AM -0800, seph 004 wrote:
when I run the script. The problem is the pulse duration I’m seeing
is much shorter (about 1/10) than what I expect.
Unless the total number of samples comes out to a multiple of 128,
some will left in the host buffer and not transmitted across the USB.
Try padding your vsource data with zeros to a multiple of 128.