You know… I realized that after I wrote the email. My mistake… But,
same results??
My output is
“”
Nil
Any other ideas?
Brian C.
Operations Manager
MGAM Systems, Inc.
1 Broadway Place
Schenectady, NY 12305
<Yahoo Search - Web Search
enectady%2C+NY+12305&country=us>
[email protected] mailto:[email protected]
tel:
fax:
mobile:
518-881-1121
518-881-1128
518-727-6652
From: [email protected]
[mailto:[email protected]] On Behalf Of Chris H.
Sent: Thursday, March 16, 2006 6:28 PM
To: [email protected]
Subject: Re: [Rails] File Auditing with rails - File I/O issue
I think you might want to try
outfile = “out.gz”
…
Zlib::GzipWriter.open(outfile) do |gz|
gz.write(File.read(tempfile))
end
also, gzip != zip hence why winzip can’t do anything with the resulting
gzipped file. I wouldn’t know if winzip supports gzip compression or
not. the extension for a gzipped file is typically .gz.
Chris
On 3/16/06, Brian C. [email protected] wrote:
Hey Folks,
I’ve written a script to generate a list of all files on a machine,
then zip the results. I’m going to stick a web front end on it, and use
it to audit some file servers. The problem is that the ZIP
compression/decompression isn’t working,
but its not what you might think. The script completes, but seems to
not actually write anything.
Here is a short version that only looks at the C:/temp drive. You can
change this at the top.
—Start Code Here–
require ‘find’
require ‘csv’
require ‘zlib’
tempfile = “temp.csv”
outfile = “out.zip”
dirname = “c:/temp”
Prepare comma-delimited file for writing
CSV::Writer.generate (File.open(tempfile,“w+”), ‘,’) do |csv|
Find.find(dirname) do |f|
csv << [File.dirname(f), File.basename(f), File.mtime(f).to_s]
end
end
TEST: View the tempfile to make sure it has data.
This prints nothing, but the file DOES have info after
the script completes. Maybe the file isn’t written at this point?
p IO.read(tempfile)
Zlib::GzipWriter.open(outfile) do |gz|
gz << File.open (tempfile).read
end
Zlib::GzipReader.open(outfile) {|gz|
print gz.read
}
The ZIP file can’t be extracted with WINZIP. No idea why, but since
I’ll be using another RUBY script for extraction, im not sure that I
care.