Hello Thomas H Kim:
I assume you have the two clocks synchronized. There is a 10 MHz
reference clock input on the front of the USRP2. But on the USRP you
need to get a soldering iron and modify the hardware a little (I think
you need to remove a resistor, or something like that) to add a 10 MHz
reference input.
You could also the use the 1 PPS input for your two USRPs.
Let me know if this helps.
Steve
— On Mon, 1/10/11, Thomas H Kim [email protected] wrote:
From: Thomas H Kim [email protected]
Subject: [Discuss-gnuradio] Benchmark scripts
To: [email protected]
Date: Monday, January 10, 2011, 3:55 PM
All,
I am testing 2x USRP1 with RFX2400 daughter
cards with benchmark_rx and benchmark_tx scripts and have questions.
When I set the MCS to dbpsk, error rate
I got was close to zero.
When I set it to dqpsk, d8psk, error
rate is 100%.
When I set it to gmsk, certain daughter
cards had close to 0 error rate, but certain swung from 0% to 100%.
I asked about it to Ettus research,
they told me that it’s likely to be due to frequency offset between the
two boxes I have.
If it is true,
-
how can I compensate the offset?
-
Has someone used dqpsk, d8psk in
2.4MHz ISM band before? If so, what extra step is necessary?
Thanks,
Thomas
-----Inline Attachment Follows-----
Discuss-gnuradio mailing list
[email protected]
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio