I finally just took out the line that was returning the error and the
testing passed (square_ff = square_ff.make;). Not sure why that line
would
be generated in the gr-howto/build/swig/howto_swig.py file because I
never
edited it myself. Just wanted to let someone know in case it was a
problem
with some generation or build file.
On Mon, Feb 11, 2013 at 03:09:04PM -0500, Brooke H. wrote:
I finally just took out the line that was returning the error and the testing
passed (square_ff = square_ff.make;). Not sure why that line would be generated
in the gr-howto/build/swig/howto_swig.py file because I never edited it myself.
Just wanted to let someone know in case it was a problem with some generation
or build file.
I don’t know how this line could drop in here, and I’ve never seen it
happen. Can you tell me which gr_modtool command line caused that and
which
version you were using?
MB
Karlsruhe Institute of Technology (KIT)
Communications Engineering Lab (CEL)
Dipl.-Ing. Martin B.
Research Associate
Kaiserstraße 12
Building 05.01
76131 Karlsruhe
Phone: +49 721 608-43790
Fax: +49 721 608-46071
www.cel.kit.edu
KIT – University of the State of Baden-Württemberg and
National Laboratory of the Helmholtz Association
On Tue, Feb 12, 2013 at 2:51 AM, Martin B. (CEL)
[email protected] wrote:
76131 Karlsruhe
[email protected]
Discuss-gnuradio Info Page
I get the same line using the gr_modtool from your github repo using
(wget https://raw.github.com/mbant/gr-modtool/master/gr_modtool.py).
Last updated 6 days ago on rev 3d650ba57b177e81cef2c30ab2c00eb1e19ac3bd.
I tried again to verify, ctest -V output @
The first one (ctest1.mak) is what gets generated with cmake ..
. The
second one I removed the offending line (352). Now I forget how I
solved it. But I did verify the gr_howto that comes in the GR repo
works as expected.
-nathan
PS, doubt this matters but I used v3.6.3-65-g7e9a439f
On Tue, Feb 12, 2013 at 12:51 AM, Martin B. (CEL)
[email protected]wrote:
I don’t know how this line could drop in here, and I’ve never seen it
happen. Can you tell me which gr_modtool command line caused that and which
version you were using?
This is a result of the ordering issue Tom and I mentioned to you in the
swig.i file. You’ve already fixed it in the latest branch set for
merging
(which I’ll probably do today.) I don’t know if this is fixed in the
standalone repo yet.
Johnathan