Hey ,
I am trying to install gnuradio version 3.5.3 with uhd for digital
image processing purposes .
System Specs :
—> Ubuntu 10.10 Maverick - 64 bit machine. Hence i do the following.
Step 1) I build and install uhd first and so libuhd.so ,
libuhd.so.003.004
and libuhd.so.003 already do exist in the default usr/local/lib path .
step 2) Then i try to build gnuradio from source and i run ./configure
–enable-gr-uhd which runs fine.
step 3) I run make which also seems to run fine but the error comes in
when
i try to run “make check”, i get the following error message :
make[4]: Leaving directory /home/anay/gnuradio/gr-uhd/doc' Making check in swig make[4]: Entering directory/home/anay/gnuradio/gr-uhd/swig’
make check-am
make[5]: Entering directory /home/anay/gnuradio/gr-uhd/swig' make check-TESTS make[6]: Entering directory/home/anay/gnuradio/gr-uhd/swig’
Traceback (most recent call last):
File “./qa_uhd.py”, line 24, in
import uhd_swig
File “/home/anay/gnuradio/gr-uhd/swig/uhd_swig.py”, line 24, in
_uhd_swig = swig_import_helper()
File “/home/anay/gnuradio/gr-uhd/swig/uhd_swig.py”, line 16, in
swig_import_helper
import _uhd_swig
ImportError: libuhd.so.003: cannot open shared object file: No such file
or
directory
.
I wanted to plug in /usr/local/lib/ in ld.so.conf but it was already
there.
I have run it several times now and i cant seem to find a resolution to
this .
I would be greatful if somebody were to help me out in this regard.
Thanks,
Anay.
I wanted to plug in /usr/local/lib/ in ld.so.conf but it was already there.
I have run it several times now and i cant seem to find a resolution to
this .
Post install task for ubuntu/debian libraries:
sudo ldconfig
Does it work now?
-Josh
./build-gnuradio
This script will install Gnu Radio from current GIT sources
You will require Internet access from the computer on which this
script runs. You will also require SUDO access. You will require
approximately 500MB of free disk space to perform the build.
This script will, as a side-effect, remove any existing Gnu Radio
installation that was installed from your Linux distribution packages.
It must do this to prevent problems due to interference between
a linux-distribution-installed Gnu Radio/UHD and one installed from GIT
source.
The whole process may take up to two hours to complete, depending on the
capabilities of your system.
!!!
NOTE: if you run into problems while running this script, you can re-run
it with
the --verbose option to produce lots of diagnostic output to help debug
problems.
This script has been written to anticipate some of the more common
problems one might
encounter building ANY large, complex software package. But it is not
pefect, and
there are certainly some situations it could encounter that it cannot
deal with
gracefully. Altering the system configuration from something reasonably
standard,
removing parts of the filesystem, moving system libraries around
arbitrarily, etc,
it likely cannot cope with. It is just a script. It isn’t intuitive or
artificially
intelligent. It tries to make life a little easier for you, but at the
end of the day
if it runs into trouble, a certain amount of knowledge on your part
about
system configuration and idiosyncrasies will inevitably be necessary.
Proceed?y
Starting all functions at: Sun May 12 20:52:31 IST 2013
SUDO privileges are required
Do you have SUDO privileges?y
Continuing with script
[sudo] password for ankita:
Installing prerequisites.
====> THIS MAY TAKE QUITE SOME TIME <=====
Checking for package libfontconfig1-dev
Checking for package libxrender-dev
Checking for package libpulse-dev
Checking for package swig
Checking for package g++
Checking for package automake
Checking for package autoconf
Checking for package libtool
Checking for package python-dev
Checking for package libfftw3-dev
Checking for package libcppunit-dev
Checking for package libboost-all-dev
Checking for package libusb-dev
Checking for package libusb-1.0-0-dev
Checking for package fort77
Checking for package libsdl1.2-dev
Checking for package python-wxgtk2.8
Checking for package git-core
Checking for package guile-1.8-dev
Checking for package libqt4-dev
Checking for package python-numpy
Checking for package ccache
Checking for package python-opengl
Checking for package libgsl0-dev
Checking for package python-cheetah
Checking for package python-lxml
Checking for package doxygen
Checking for package qt4-dev-tools
Checking for package libusb-1.0-0-dev
Checking for package libqwt5-qt4-dev
Checking for package libqwtplot3d-qt4-dev
Checking for package pyqt4-dev-tools
Checking for package python-qwt5-qt4
Checking for package cmake
Checking for package git-core
Checking for package wget
Checking for package libxi-dev
Checking for package python-docutils
Checking for package gtk2-engines-pixbuf
Checking for package r-base-dev
Checking for package python-tk
Checking for package liborc-0.4-0
Checking for package liborc-0.4-dev
Checking for package libasound2-dev
Checking for package python-gtk2
Checking for library libusb …Found library libusb
Checking for library libboost …Found library libboost
Checking for library libcppunit …Found library libcppunit
Checking for library libguile …Found library libguile
Checking for library libfftw …Found library libfftw
Checking for library libgsl …Found library libgsl
Done
Fetching various packages (Gnu Radio, UHD, gr-osmosdr, etc)
via the Internet
=======> THIS MAY TAKE QUITE SOME TIME <=========
Fetching Gnu Radio via GIT…Done
Fetching UHD via GIT…Fetching rtl-sdr (rtl-sdr, and gr-osmosdr) via
GIT
Done
Starting function uhd_build at: Sun May 12 21:04:44 IST 2013
Building UHD…
=============> THIS WILL TAKE SOME TIME <=============
UHD build apparently failed
Exiting UHD build
_______________________________________________________________–
Someone please help Me remove the error.