is it normal that the LFTX - LF board (REV 2.2) provides only 3 dBm
(about 2 mW) output power on TX_A and/or TX_B ?
My configuration and test conditions:
- USRP2 with LFTX board
- each output (TX_A and TX_B) is connected to a separate 50 Ohm load
- using GNURADIO example: usrp2_siggen_gui.py (please see attachment
with my parameters)
Could someone tell me if this is all OK or could it be that something is
wrong with my Hardware / Software ?