Dear all,
I want to install gnu radio on to ubuntu linux 9.04 (Jaunty). And I have
downloaded the deb package as list below. After that, do I install all
package one by one? Thank you
Makmur
List deb package that I downloaded:
gnuradio_3.2.2-1_all.deb
gnuradio-apps_3.2.2-1_all.deb
gnuradio-companion_3.2.2-1_i386.deb
gnuradio-doc_3.2.2-1_all.deb
gnuradio-examples_3.2.2-1_i386.deb
gnuradio-gpio_3.2.2-1_i386.deb
gnuradio-pager_3.2.2-1_i386.deb
gnuradio-radar-mono_3.2.2-1_i386.deb
gnuradio-radio-astronomy_3.2.2-1_i386.deb
gnuradio-sounder_3.2.2-1_i386.deb
gnuradio-utils_3.2.2-1_i386.deb
libgnuradio_3.2.2-1_all.deb
libgnuradio-audio-alsa_3.2.2-1_i386.deb
…
until
…
usrp-doc_3.2.2-1_all.deb
2010/1/22 Makmur H. [email protected]:
Dear all,
I want to install gnu radio on to ubuntu linux 9.04 (Jaunty). And I have
downloaded the deb package as list below. After that, do I install all
package one by one?
You can do that but I think you will find it more convenient to
install using the Synaptic package manager. Add the line
deb http://gnuradio.org/ubuntu stable main
to the repositories (Settings->Repositories->Other software) and after
you refresh you will have the gnuradio packages in the list.
Otherwise see http://gnuradio.org/redmine/wiki/gnuradio/DebianPackages
for how you can use the command line.
Alex
Thank you for your suggestion. I did your suggestion. And I have
finished
the installation.
As far as I know that after installation then the package installed can
be
found in /usr/local/lib/python2.6/site-packages. But after I checked,
the
folder is empty.
Therefore, I did wrong installation? How to check that I have done right
installation?
Thank you very much
Makmur
2010/1/22 Alexandru C. [email protected]
On Sun, Jan 24, 2010 at 20:48, Makmur H. [email protected] wrote:
As far as I know that after installation then the package installed can be
found in /usr/local/lib/python2.6/site-packages. But after I checked, the
folder is empty.
The usual place for binary packages is in /usr, not /usr/local, so
you’ll find the installed binaries in /usr/lib, Python files in
/usr/lib/python2.6/site-packages, and examples in /usr/share/gnuradio.
Johnathan
Dear Johnathan and Alexandru C.,
Because there are many errors so I reinstall fresh ubuntu linux 9.04
(Jaunty) again.
Then I installed gnu radio following instruction from
http://gnuradio.org/redmine/wiki/gnuradio/DebianPackages.
- Firstly I open Synaptic Package Manager. Then click Setting →
Repositories
→ Third-Party Software → Add
- Then in APT line, I insert = deb http://gnuradio.org/ubuntu stable
main
- And I repeat and insert = deb-src http://gnuradio.org/ubuntu stable
main
However, after waiting several minutes, it come up errors (below).
And I repeat several times, but the error still come up.
So what is the mistake of my installation?
Thank you
Makmur
This is the errors:
W: Failed to fetch
http://au.archive.ubuntu.com/ubuntu/dists/jaunty/Release.gpg Could not
connect to au.archive.ubuntu.com:80
http://au.archive.ubuntu.com/(91.189.88.46), connection timed out
[IP: 91.189.88.46 80]
W: Failed to fetch
http://au.archive.ubuntu.com/ubuntu/dists/jaunty/main/i18n/Translation-en_AU.bz2
Unable to connect to au.archive.ubuntu.com http: [IP: 91.189.88.46 80]
W: Failed to fetch
http://au.archive.ubuntu.com/ubuntu/dists/jaunty/restricted/i18n/Translation-en_AU.bz2
Unable to connect to au.archive.ubuntu.com http: [IP: 91.189.88.46 80]
W: Failed to fetch
http://au.archive.ubuntu.com/ubuntu/dists/jaunty/universe/i18n/Translation-en_AU.bz2
Unable to connect to au.archive.ubuntu.com http: [IP: 91.189.88.46 80]
W: Failed to fetch
http://au.archive.ubuntu.com/ubuntu/dists/jaunty/multiverse/i18n/Translation-en_AU.bz2
Unable to connect to au.archive.ubuntu.com http: [IP: 91.189.88.46 80]
W: Failed to fetch
http://au.archive.ubuntu.com/ubuntu/dists/jaunty-updates/Release.gpg
Unable
to connect to au.archive.ubuntu.com http: [IP: 91.189.88.46 80]
W: Failed to fetch
http://au.archive.ubuntu.com/ubuntu/dists/jaunty-updates/main/i18n/Translation-en_AU.bz2
Unable to connect to au.archive.ubuntu.com http: [IP: 91.189.88.46 80]
W: Failed to fetch
http://au.archive.ubuntu.com/ubuntu/dists/jaunty-updates/restricted/i18n/Translation-en_AU.bz2
Unable to connect to au.archive.ubuntu.com http: [IP: 91.189.88.46 80]
W: Failed to fetch
http://au.archive.ubuntu.com/ubuntu/dists/jaunty-updates/universe/i18n/Translation-en_AU.bz2
Unable to connect to au.archive.ubuntu.com http: [IP: 91.189.88.46 80]
W: Failed to fetch
http://au.archive.ubuntu.com/ubuntu/dists/jaunty-updates/multiverse/i18n/Translation-en_AU.bz2
Unable to connect to au.archive.ubuntu.com http: [IP: 91.189.88.46 80]
W: Failed to fetch
http://security.ubuntu.com/ubuntu/dists/jaunty-security/Release.gpg
Could
not connect to security.ubuntu.com:80
http://security.ubuntu.com/(91.189.88.37), connection timed out
W: Failed to fetch
http://security.ubuntu.com/ubuntu/dists/jaunty-security/main/i18n/Translation-en_AU.bz2
Unable to connect to security.ubuntu.com http:
W: Failed to fetch
http://security.ubuntu.com/ubuntu/dists/jaunty-security/restricted/i18n/Translation-en_AU.bz2
Unable to connect to security.ubuntu.com http:
W: Failed to fetch
http://security.ubuntu.com/ubuntu/dists/jaunty-security/universe/i18n/Translation-en_AU.bz2
Unable to connect to security.ubuntu.com http:
W: Failed to fetch
http://security.ubuntu.com/ubuntu/dists/jaunty-security/multiverse/i18n/Translation-en_AU.bz2
Unable to connect to security.ubuntu.com http:
W: Failed to fetch http://gnuradio.org/ubuntu/dists/stable/Release.gpg
Could not connect to gnuradio.org:80 http://gnuradio.org/
(68.169.43.17),
connection timed out
W: Failed to fetch
http://gnuradio.org/ubuntu/dists/stable/main/i18n/Translation-en_AU.bz2
Unable to connect to gnuradio.org http:
W: Some index files failed to download, they have been ignored, or old
ones
used instead.
2010/1/26 Johnathan C. [email protected]
On Thu, Jan 28, 2010 at 4:05 AM, Makmur H. [email protected]
wrote:
This is the errors:
W: Failed to fetch
http://au.archive.ubuntu.com/ubuntu/dists/jaunty/Release.gpg Could not
connect to au.archive.ubuntu.com:80 (91.189.88.46), connection timed out
[IP: 91.189.88.46 80]
Proxy? Are you behind a firewall that uses a web proxy? If so:
System → Network proxy → Manual proxy configuration → (your settings)
Apply System-Wide
Restart Synaptic (and reload)
Pascal
Thank you Johnathan, I finished installation and I found the binary
packages
in the folder as you mentioned.
Thanks
Makmur
2010/1/26 Johnathan C. [email protected]
Thank you Pascal, I configured proxy setting, and then downloading
successfully without error anymore.
Thanks
Makmur
2010/1/29 Pascal C. [email protected]