Hello,
I am learning PM Demodulation, and someones tell me that the FM
Demodulator
in gnuradio can demodulate the PM signals.
I want to get the carrier’s frequency offset in PM demodulating, does
gnuradio provide this function?
For example, in my project, I set the frequency of IF signal is 70MHz,
but
the real input IF signal is 70.01MHz.
In this case, I hope my program can print the carrier’s frequency
offset,
10KHz
Thank you.
On Wed, Jan 30, 2013 at 9:30 AM, adream [email protected] wrote:
I am feel sorry for no reply
It’s just been a day - sometimes if the answer doesn’t come quickly,
people
are confused by what you’re asking.
2013/1/30 adream [email protected]
Does gnuradio provide this function?
thank you
Natively I don’t think it does, but there are properties to the
demodulated
signal you may be able to exploit and calculate it.
In this case, I hope my program can print the carrier’s frequency
offset, 10KHz
Thank you.
FM has the property that frequency offset results in a DC offset at the
demodulated signal that is proportional to the amount of frequency
offset
(given the input signal has no DC component).
For PM, since you are not taking the first derivative of the phase as
you
are with FM, the DC component will be shifted up to your frequency
offset.
Doing a long term average of a demodulated FM signal should
(hopefully!)
come out to be 0 for no frequency offset.
You could FM demodulate, put a DC filter then reintegrate at the output
to
get your PM signal back - but I am not sure how well that works. Give
it a
shot and let us know!
Hope that helped.
Brian
On Wed, Jan 30, 2013 at 11:16 AM, Brian P.
[email protected]wrote:
On Wed, Jan 30, 2013 at 9:30 AM, adream [email protected] wrote:
I am feel sorry for no reply
It’s just been a day - sometimes if the answer doesn’t come quickly,
people are confused by what you’re asking.
True. A lot of us are also very busy with other things and can’t come
rushing to answer all questions.
2013/1/30 adream [email protected]
2013/1/29 adream [email protected]
Thank you.
You could FM demodulate, put a DC filter then reintegrate at the output to
get your PM signal back - but I am not sure how well that works. Give it a
shot and let us know!Hope that helped.
Brian
And remember, there are also the PLL blocks.
Tom