GSoC update - Zynq FPGA coprocessor wiki article posted

GNU Radio
1

For those interested in FPGA coprocessors with Xilinx’s Zynq SoC, I have
posted a wiki article with comprehensive instructions on how to setup
the
various development boards and run an example C program on the ARM
processors that communicates with a FIR filter in the FPGA fabric. The
article also includes some information on the infrastructure that will
enable GNU Radio access to FPGA coprocessors.

Right now I am continuing development on adding a FPGA accelerated FIR
filter block to GNU Radio and will update the wiki with that information
in
the upcoming weeks.

Please let me know if anyone runs into issues or how I can improve the
setup!

Gnuradio.org Zynq wiki article:
http://gnuradio.org/redmine/projects/gnuradio/wiki/Zynq
http://gnuradio.org/redmine/projects/gnuradio/wiki/Zynq

–
View this message in context:
http://gnuradio.4.n7.nabble.com/GSoC-update-Zynq-FPGA-coprocessor-wiki-article-posted-tp43021.html
Sent from the GnuRadio mailing list archive at Nabble.com.

2

On Wed, Aug 07, 2013 at 10:44:29AM -0700, jpendlum wrote:

For those interested in FPGA coprocessors with Xilinx’s Zynq SoC, I have
posted a wiki article with comprehensive instructions on how to setup the
various development boards and run an example C program on the ARM
processors that communicates with a FIR filter in the FPGA fabric. The
article also includes some information on the infrastructure that will
enable GNU Radio access to FPGA coprocessors.

Hi Jonathon,

thanks for great write-up. This really goes a long way to making sure
your GSoC work will have a lasting impact on this community.

Martin

–
Karlsruhe Institute of Technology (KIT)
Communications Engineering Lab (CEL)

Dipl.-Ing. Martin B.
Research Associate

Kaiserstraße 12
Building 05.01
76131 Karlsruhe

Phone: +49 721 608-43790
Fax: +49 721 608-46071
www.cel.kit.edu

KIT – University of the State of Baden-Württemberg and
National Laboratory of the Helmholtz Association