hello ,
i am new in usrp and GNU radio ,…
i have usrp n210 and wbx (50-2200 Mhz) daughter board ,
i have installed GRC on Ubuntu 12.04 LTS ,
i wrote the .GRC file and generate the python code …
when i use my hardware to transmit a signals using ( usrp sink ) …
there
are interface and a signal will appears and no problems…
but when i 'm trying to receive signals (FM signals for example ) ,… ,
in
the usrp n210 motherboard … the led C ( receiving) is on , but in the
graphical interface … no signal appear …
also i used the command ( " iptraf " ) to view if there are a traffic on
the interface eth0 ,
there are traffic but the software dosen’t comprehend the receiving Data
,
// UDP (52 bytes) from 192.168.10.20:49157 to 192.168.10.1:47842 on
eth0
// UDP (52 bytes) from 192.168.10.20:49157 to 192.168.10.1:47842 on
eth0
please help me … i don’t know why no signal appears in GUI …
how may i receive signal ? and is there another method to receive
signal?
thanks you lot .