I am trying to use two GPS PPS signals to synchronize two USRP N210 (Tx
First I connected the PPS signal to the front SMA port of USRP. Then I
used command set_time_unknown_pps(uhd.time_spec()). However, I found
seems not synchronized. The transmitter is not transmitting when the up
PPS signal is coming. Is there other method to synchronize two USRPs
they can sample at the same time.
Thank you very much for your time and help.
View this message in context:
Sent from the GnuRadio mailing list archive at Nabble.com.