GNUradio Building Problems

JUAN_LARA_AMBEL · August 5, 2008, 1:23pm

Hi all,

here is a ewcomer’s question on installation and building of gnuradio
package 3.2.

I’ve both downloaded the tarball ‘gnuradio.3.2.tar…’ plus readme &
install instructions and afterwards tried the CVS
version, in any case followed the building procedure from Gnuradio.org
webpage.

Once successfully configured the package I’ve proceed to make it,
however it reports back a (for me) non-trivial error (see bottom of
the following output-dump) on libtool:

juanlara@Caleidoscopio:~/Desktop/gnuradio$ sudo make
make all-recursive
make[1]: Entering directory /home/juanlara/Desktop/gnuradio' Making all in config make[2]: Entering directory /home/juanlara/Desktop/gnuradio/config’
make[2]: Nothing to be done for all'. make[2]: Leaving directory /home/juanlara/Desktop/gnuradio/config’
Making all in gruel
make[2]: Entering directory /home/juanlara/Desktop/gnuradio/gruel' Making all in src make[3]: Entering directory /home/juanlara/Desktop/gnuradio/gruel/src’
Making all in include
make[4]: Entering directory
/home/juanlara/Desktop/gnuradio/gruel/src/include' Making all in gruel make[5]: Entering directory /home/juanlara/Desktop/gnuradio/gruel/src/include/gruel’
make all-am
make[6]: Entering directory
/home/juanlara/Desktop/gnuradio/gruel/src/include/gruel' make[6]: Nothing to be done for all-am’.
make[6]: Leaving directory
/home/juanlara/Desktop/gnuradio/gruel/src/include/gruel' make[5]: Leaving directory /home/juanlara/Desktop/gnuradio/gruel/src/include/gruel’
make[5]: Entering directory
/home/juanlara/Desktop/gnuradio/gruel/src/include' make[5]: Nothing to be done for all-am’.
make[5]: Leaving directory
/home/juanlara/Desktop/gnuradio/gruel/src/include' make[4]: Leaving directory /home/juanlara/Desktop/gnuradio/gruel/src/include’
Making all in lib
make[4]: Entering directory
/home/juanlara/Desktop/gnuradio/gruel/src/lib' /bin/bash ../../../libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H -I. -I../../.. -DOMNITHREAD_POSIX=1 -I/home/juanlara/Desktop/gnuradio/gruel/src/include -g -O2 -Wall -Woverloaded-virtual -pthread -MT realtime.lo -MD -MP -MF .deps/realtime.Tpo -c -o realtime.lo realtime.cc ../../../libtool: line 463: CDPATH: command not found ../../../libtool: line 1266: func_opt_split: command not found libtool: Version mismatch error. This is libtool 2.2, but the libtool: definition of this LT_INIT comes from an older release. libtool: You should recreate aclocal.m4 with macros from libtool 2.2 libtool: and run autoconf again. make[4]: *** [realtime.lo] Error 63 make[4]: Leaving directory /home/juanlara/Desktop/gnuradio/gruel/src/lib’
make[3]: *** [all-recursive] Error 1
make[3]: Leaving directory /home/juanlara/Desktop/gnuradio/gruel/src' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory /home/juanlara/Desktop/gnuradio/gruel’
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/juanlara/Desktop/gnuradio’
make: *** [all] Error 2

¿Might anybody help me fixing this?

Ps. environment info: Ubuntu 8.04 , kernel version 2.6.24

Thanks,

JUAN_LARA_AMBEL · October 30, 2011, 6:30am

engrawais@ubuntu:~$ grc

(grc:2743): Gtk-WARNING **: Unable to locate theme engine in
module_path: “pixmap”,

(grc:2743): Gtk-WARNING **: Unable to locate theme engine in
module_path: “pixmap”,
<<< Welcome to GNU Radio Companion 3.2.2 >>>
Error: ‘options’

Failue
Traceback (most recent call last):
File
“/usr/lib/python2.7/dist-packages/gnuradio/grc/gui/MainWindow.py”, line
174, in new_page
flow_graph = self._platform.get_new_flow_graph()
File “/usr/lib/python2.7/dist-packages/gnuradio/grc/base/Platform.py”,
line 149, in get_new_flow_graph
def get_new_flow_graph(self): return self.FlowGraph(self)
File “”, line 4, in init
File
“/usr/lib/python2.7/dist-packages/gnuradio/grc/base/FlowGraph.py”, line
37, in init
self.import_data()
File
“/usr/lib/python2.7/dist-packages/gnuradio/grc/base/FlowGraph.py”, line
192, in import_data
self._options_block = self.get_parent().get_new_block(self,
‘options’)
File “/usr/lib/python2.7/dist-packages/gnuradio/grc/base/Platform.py”,
line 159, in get_new_block
def get_new_block(self, flow_graph, key): return
self.Block(flow_graph, n=self._blocks_n[key])
File “/usr/lib/python2.7/dist-packages/gnuradio/grc/base/odict.py”,
line 34, in getitem
return self._data[key]
KeyError: ‘options’
Error: ‘options’

Failue
Traceback (most recent call last):
File
“/usr/lib/python2.7/dist-packages/gnuradio/grc/gui/MainWindow.py”, line
174, in new_page
flow_graph = self._platform.get_new_flow_graph()
File “/usr/lib/python2.7/dist-packages/gnuradio/grc/base/Platform.py”,
line 149, in get_new_flow_graph
def get_new_flow_graph(self): return self.FlowGraph(self)
File “”, line 4, in init
File
“/usr/lib/python2.7/dist-packages/gnuradio/grc/base/FlowGraph.py”, line
37, in init
self.import_data()
File
“/usr/lib/python2.7/dist-packages/gnuradio/grc/base/FlowGraph.py”, line
192, in import_data
self._options_block = self.get_parent().get_new_block(self,
‘options’)
File “/usr/lib/python2.7/dist-packages/gnuradio/grc/base/Platform.py”,
line 159, in get_new_block
def get_new_block(self, flow_graph, key): return
self.Block(flow_graph, n=self._blocks_n[key])
File “/usr/lib/python2.7/dist-packages/gnuradio/grc/base/odict.py”,
line 34, in getitem
return self._data[key]
KeyError: ‘options’
Traceback (most recent call last):
File “/usr/bin/grc”, line 53, in
ActionHandler(args, Platform())
File
“/usr/lib/python2.7/dist-packages/gnuradio/grc/gui/ActionHandler.py”,
line 70, in init
self.handle_states(Actions.APPLICATION_INITIALIZE)
File
“/usr/lib/python2.7/dist-packages/gnuradio/grc/gui/ActionHandler.py”,
line 332, in handle_states
Actions.get_action_from_name(Actions.ELEMENT_DELETE).set_sensitive(bool(self.get_flow_graph().get_selected_elements()))
File
“/usr/lib/python2.7/dist-packages/gnuradio/grc/gui/MainWindow.py”, line
281, in get_flow_graph
return self.get_page().get_flow_graph()
AttributeError: ‘NoneType’ object has no attribute ‘get_flow_graph’