GNU Radio Installation

I’m installing gnuradio again on my ubuntu 14.04 installed in VMware
11.1.0. I tried it several times, but I can’t seem to pass this step:

Fetching various packages (Gnu Radio, UHD, gr-osmosdr, gr-iqbal, etc)
via the Internet
=======> THIS MAY TAKE QUITE SOME TIME <=========
Fetching Gnu Radio via GIT…Cloning into ‘gnuradio’…

It’s been almost 12 hours and it’s not getting anywhere.

What should I change in my installation steps?

I am following this steps below:

  1. mkdir ~/gnuradio
  2. cd ~/gnuradio
  3. wget http://www.sbrac.org/files/build-gnuradio
  4. chmod a+x build-gnuradio
  5. ./build-gnuradio --verbose all

Thanks in advance.

*Gerome Jan M. Llames *
Engineering Research and Development for Technology (ERDT) Scholar
University of San Carlos - Technological Campus
Nasipit Talamban, Cebu City, Philippines, 6000
Mobile: +639271525124
Email: [email protected]

On 05/28/2015 07:31 PM, Gerome Jan L wrote:

What should I change in my installation steps?

My guess is that your institution blocks GIT, or you have some
network-stack issue that’s preventing GIT from making forward progress
in your VM.

The fixes to Ubuntu installed IPV6 which basically kills the network
opens. Disable it and reboot.

73,

Alan - W6ARH

From: discuss-gnuradio-bounces+alan.r.hill=removed_email_address@domain.invalid
[mailto:discuss-gnuradio-bounces+alan.r.hill=removed_email_address@domain.invalid] On
Behalf Of Gerome Jan L
Sent: Thursday, May 28, 2015 4:31 PM
To: [email protected]
Subject: [Discuss-gnuradio] GNU Radio Installation

I’m installing gnuradio again on my ubuntu 14.04 installed in VMware
11.1.0. I tried it several times, but I can’t seem to pass this step:

Fetching various packages (Gnu Radio, UHD, gr-osmosdr, gr-iqbal, etc)

via the Internet

=======> THIS MAY TAKE QUITE SOME TIME <=========

Fetching Gnu Radio via GIT…Cloning into ‘gnuradio’…

It’s been almost 12 hours and it’s not getting anywhere.

What should I change in my installation steps?

I am following this steps below:

  1. mkdir ~/gnuradio

  2. cd ~/gnuradio

  3. wget http://www.sbrac.org/files/build-gnuradio

  4. chmod a+x build-gnuradio

  5. ./build-gnuradio --verbose all

Thanks in advance.

Gerome Jan M. Llames

Engineering Research and Development for Technology (ERDT) Scholar

University of San Carlos - Technological Campus

Nasipit Talamban, Cebu City, Philippines, 6000

Mobile: +639271525124

Email: mailto:[email protected] [email protected]

Check the internet for suggestions on how to cure slow internet
connections in Ubuntu. You do not have to be using it to have it
active.

Alan

From: Gerome Jan L [mailto:[email protected]]
Sent: Thursday, May 28, 2015 5:10 PM
To: Silverfox
Cc: [email protected]
Subject: Re: [Discuss-gnuradio] GNU Radio Installation

What do you mean IPv6? I’m using IPv4. Sorry, but I don’t quiet get your
suggestion. Please elaborate. Thanks.

Gerome Jan M. Llames

Engineering Research and Development for Technology (ERDT) Scholar

University of San Carlos - Technological Campus

Nasipit Talamban, Cebu City, Philippines, 6000

Mobile: +639271525124

Email: mailto:[email protected] [email protected]

On Fri, May 29, 2015 at 7:49 AM, Silverfox [email protected]
wrote:

The fixes to Ubuntu installed IPV6 which basically kills the network
opens. Disable it and reboot.

73,

Alan - W6ARH

From: discuss-gnuradio-bounces+alan.r.hill=removed_email_address@domain.invalid
[mailto:discuss-gnuradio-bounces+alan.r.hill
mailto:discuss-gnuradio-bounces%2Balan.r.hill [email protected]] On
Behalf Of Gerome Jan L
Sent: Thursday, May 28, 2015 4:31 PM
To: [email protected]
Subject: [Discuss-gnuradio] GNU Radio Installation

I’m installing gnuradio again on my ubuntu 14.04 installed in VMware
11.1.0. I tried it several times, but I can’t seem to pass this step:

Fetching various packages (Gnu Radio, UHD, gr-osmosdr, gr-iqbal, etc)

via the Internet

=======> THIS MAY TAKE QUITE SOME TIME <=========

Fetching Gnu Radio via GIT…Cloning into ‘gnuradio’…

It’s been almost 12 hours and it’s not getting anywhere.

What should I change in my installation steps?

I am following this steps below:

  1. mkdir ~/gnuradio

  2. cd ~/gnuradio

  3. wget http://www.sbrac.org/files/build-gnuradio

  4. chmod a+x build-gnuradio

  5. ./build-gnuradio --verbose all

Thanks in advance.

Gerome Jan M. Llames

Engineering Research and Development for Technology (ERDT) Scholar

University of San Carlos - Technological Campus

Nasipit Talamban, Cebu City, Philippines, 6000

Mobile: +639271525124 tel:%2B639271525124

Email: mailto:[email protected] [email protected]

What do you mean IPv6? I’m using IPv4. Sorry, but I don’t quiet get your
suggestion. Please elaborate. Thanks.

*Gerome Jan M. Llames *
Engineering Research and Development for Technology (ERDT) Scholar
University of San Carlos - Technological Campus
Nasipit Talamban, Cebu City, Philippines, 6000
Mobile: +639271525124
Email: [email protected]