Getting USRP N210 running

GNU Radio
1

Hello list,

I am trying to get USRP N210 running. I experience a problem when I
connect
it to my computer. I see only B and F LEDs on, the Ethernet LEDs are
shut
down after about one second of switching on USRP. “mii-tools eth0”
outputs
“1000 MBit, half duplex, no link”. Wiresharks shows no packets
exchanged.

I also have set up the UHD and configured the eth0 to static address
192.168.10.1, but uhd_find_devices shows nothing.

Any ideas how I can proceed?

Thanks.

Vadim.

2

On Tue, 2010-12-14 at 11:57 +0100, Vadim Uvin wrote:

Any ideas how I can proceed?

Vadim,

Have you tried another cable? Has your setup worked with USRP2s in the
past?

–n

3

Hi, Nick, Vadim, Josh,

I got the same problem with two N210 in my institute, that only LED B &
F is
on.
I tried to reprogram the FPGA following the thread “Bricking and
recovery of
N210” but it remains the same?

Have you found how to work it out?

Cheers,
Hanwen

2010/12/14 Nick F. [email protected]