if you’re Makefile.am is configured correctly, all of this will happen
on it’s own. That’s why it’s called ‘autotools’
FYI: Many people here (me included), don’t use autotools, but prefer the
cmake version of things. Perhaps you should consider switching (it’s way
more fun).
MB
On Tue, Mar 20, 2012 at 10:01:31AM -0300, Loic D. wrote:
Hi guys,
After a long interruption I have started to use GR again and had to
install a fresh copy on my laptop. Everything seems to be working, the
installation went well and all the tests seems to be OK, except when I
try to run GRC.
The GRC starts without problem and I can run the dial_tone.grc without
any problem, but none of the other examples seems to work.
For example, when I load the cvsd_sweep.grc file (under the same
directory as the previous one), then I can neither generate nor execute
the example.
I have attached the screen capture of my GRC.
I am using Ubuntu 10.04 LTS and GR 3.5.1 installed from GIT.
Really appreciate your help to give me a hint of what can be the source
of the problem?
HI Marcus,
Found the problem, had some issues with the installation, so I used the
script from http://www.sbrac.org/files/build-gnuradio that removed the
old installation and installed a clean GR. Now everything seems to work
properly.
Thanks a lot everyone,
BR,
Farhad
From: Marcus D. Leech [email protected]
To: [email protected]
Sent: Tuesday, March 20, 2012 3:02 PM
Subject: Re: [Discuss-gnuradio] Problem with GRC
On 03/20/2012 09:56 AM, Farhad A. wrote:
Hi guys,
After a long interruption I have started to use GR again and had
to install a fresh copy on my laptop. Everything seems to be
working, the installation went well and all the tests seems to
be OK, except when I try to run GRC.
The GRC starts without problem and I can run the dial_tone.grc
without any problem, but none of the other examples seems to
work.
For example, when I load the cvsd_sweep.grc file (under the same
directory as the previous one), then I can neither generate nor
execute the example.
I have attached the screen capture of my GRC.
I am using Ubuntu 10.04 LTS and GR 3.5.1 installed from GIT.
Really appreciate your help to give me a hint of what can be the
source of the problem?