Hi all
I want to increase the Sampling Rate of USRP above 25M/S but its not
possible i think so i use multipal usrp.
Three usrp’s on 8 port 1 gige switch and PC port running on 25M/S give
error UUUUUUUUUUU USRP Underrun.
is it possiple to get rid of this error by using10GigE switch and port
PC.
Or any suggestion. Thanks in advance.
Regards
Muhammad Junaid
On 02/04/2013 01:18 PM, Muhammad JUNAID wrote:
Hi all
I want to increase the Sampling Rate of USRP above 25M/S but its not possible i
think so i use multipal usrp.
Its possible to get 50Msps, by lowering the bit width to 8 bits I, bits
Q over the wire.
Three usrp’s on 8 port 1 gige switch and PC port running on 25M/S give error
UUUUUUUUUUU USRP Underrun.
is it possiple to get rid of this error by using 10GigE switch and port PC.
Or any suggestion. Thanks in advance.
You need more bus bandwidth to the host. So, multiple ethernet ports on
your PC would work.
Also using a 10gigE switch is an option; as long as the link between
switch and PC is at 10gigE
-josh