Hi Johnathan,
I’m trying to understand the project gr-sounder and have some questions
on that.
-
What’s the configuration of AD9862 for the transmitter in gr-sounder.
I didn’t any code setting the register of AD9862 in the python code of
gr-sounder project. -
I used an oscilloscope to watch the signal the gr-sounder transmitter
sends from the antenna A, but the waveform is like eye diagram and
contains lots of noise. The frequency of the waveform is not the one
which I set when run the project. Is there any problem on the method I
did the test of the project?
Thanks in advance.
Yan