Compiling wxRuby on Ubuntu 10.04

I tried following your instructions and everything was going ok until I
got
to the following step:

From: Quintus [email protected]
Now unpack wxRuby and
$ cd wxruby-2.0.1
$ rake

src/BitmapButton.cpp:3771: warning: format not a string literal and no
format arguments
rake aborted!
Command failed with status (1): [g++ -c
-I/usr/local/lib/wx/include/gtk2-…]
/usr/local/lib/ruby/1.9.1/rake.rb:993:in block in sh' /usr/local/lib/ruby/1.9.1/rake.rb:1008:incall’
/usr/local/lib/ruby/1.9.1/rake.rb:1008:in sh' /usr/local/lib/ruby/1.9.1/rake.rb:1092:insh’
…/wxruby-2.0.1/rake/rakewx.rb:155:in block in <top (required)>' /usr/local/lib/ruby/1.9.1/rake.rb:632:incall’
/usr/local/lib/ruby/1.9.1/rake.rb:632:in block in execute' /usr/local/lib/ruby/1.9.1/rake.rb:629:ineach’
/usr/local/lib/ruby/1.9.1/rake.rb:629:in execute' /usr/local/lib/ruby/1.9.1/rake.rb:595:inblock in
invoke_with_call_chain’
/usr/local/lib/ruby/1.9.1/monitor.rb:201:in mon_synchronize' /usr/local/lib/ruby/1.9.1/rake.rb:588:ininvoke_with_call_chain’
/usr/local/lib/ruby/1.9.1/rake.rb:605:in block in invoke_prerequisites' /usr/local/lib/ruby/1.9.1/rake.rb:602:ineach’
/usr/local/lib/ruby/1.9.1/rake.rb:602:in invoke_prerequisites' /usr/local/lib/ruby/1.9.1/rake.rb:594:inblock in
invoke_with_call_chain’
/usr/local/lib/ruby/1.9.1/monitor.rb:201:in mon_synchronize' /usr/local/lib/ruby/1.9.1/rake.rb:588:ininvoke_with_call_chain’
/usr/local/lib/ruby/1.9.1/rake.rb:605:in block in invoke_prerequisites' /usr/local/lib/ruby/1.9.1/rake.rb:602:ineach’
/usr/local/lib/ruby/1.9.1/rake.rb:602:in invoke_prerequisites' /usr/local/lib/ruby/1.9.1/rake.rb:594:inblock in
invoke_with_call_chain’
/usr/local/lib/ruby/1.9.1/monitor.rb:201:in mon_synchronize' /usr/local/lib/ruby/1.9.1/rake.rb:588:ininvoke_with_call_chain’
/usr/local/lib/ruby/1.9.1/rake.rb:581:in invoke' /usr/local/lib/ruby/1.9.1/rake.rb:2041:ininvoke_task’
/usr/local/lib/ruby/1.9.1/rake.rb:2019:in block (2 levels) in top_level' /usr/local/lib/ruby/1.9.1/rake.rb:2019:ineach’
/usr/local/lib/ruby/1.9.1/rake.rb:2019:in block in top_level' /usr/local/lib/ruby/1.9.1/rake.rb:2058:instandard_exception_handling’
/usr/local/lib/ruby/1.9.1/rake.rb:2013:in top_level' /usr/local/lib/ruby/1.9.1/rake.rb:1992:inrun’
/usr/local/bin/rake:31:in `’

Am I missing something? Thanks.

-Philip

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Am 24.10.2010 01:58, schrieb Philip S.:

rake aborted!
/usr/local/lib/ruby/1.9.1/rake.rb:629:in execute' /usr/local/lib/ruby/1.9.1/rake.rb:602:ineach’
/usr/local/lib/ruby/1.9.1/rake.rb:2013:in top_level' /usr/local/lib/ruby/1.9.1/rake.rb:1992:inrun’
/usr/local/bin/rake:31:in `’

Am I missing something? Thanks.

-Philip

Your post is missing the actual error. The string literal warning occurs
many times during compilation and shouldn’t lead to an interruption.
Did you compile wxWidgets yourself? I’m wondering, because your include
path shows /usr/local/lib/wx, which should be /usr/lib/wx I think.
What is the output of

$ ruby -rrbconfig -ve ‘puts RbConfig::CONFIG[“configure_args”]’
$ dpkg -L libwxgtk2.8-dev
$ which wx-config

?
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/

iQEcBAEBAgAGBQJMw+YAAAoJEGrS0YjAWTKV+RkH/i7omyXw2d5j+oyez8hCkL6B
qbH7RkTtx3D5erLFPirB8UpSN1tuSigZq7pPX6uVSNvFN3F9vuLTDzzWXKz+zdWA
6SyDErzGjo8p4UatdUcKAaLpvsPUIduxSZeW2R21+iB2UhJ15+pcu5MIeRcM6wKb
KpHF/tqQexrLxCrr8Kwx3mKEEGgShntw+CaI03nigXk1KDhGwkweexcH4CyJ6ReI
90OgqOgPfcABKtQ/SQxwMjIYLwllApETwqDQbgtZ3M8xJnzri8T0zJDdDhyMB84F
oLJvmdXumguBmEjGxEB2ABCgfWqi2wsO/tqBiNN2a9QS9FB1hNyEwPInfLlnPGs=
=xQy9
-----END PGP SIGNATURE-----

Marvin Gülker wrote in post #956682:

Your post is missing the actual error. The string literal warning occurs
many times during compilation and shouldn’t lead to an interruption.
Did you compile wxWidgets yourself?

Yes I did.

I’m wondering, because your include

path shows /usr/local/lib/wx, which should be /usr/lib/wx I think.
What is the output of

$ ruby -rrbconfig -ve ‘puts RbConfig::CONFIG[“configure_args”]’
$ dpkg -L libwxgtk2.8-dev
$ which wx-config

?

$ruby -rrbconfig -ve ‘puts RbConfig::CONFIG[“configure_args”]’
ruby 1.9.2p0 (2010-08-18 revision 29036) [i686-linux]
‘–enable-shared’

$ dpkg -L libwxgtk2.8-dev
/.
/usr
/usr/lib
/usr/lib/wx
/usr/lib/wx/include
/usr/lib/wx/include/gtk2-unicode-release-2.8
/usr/lib/wx/include/gtk2-unicode-release-2.8/wx
/usr/lib/wx/include/gtk2-unicode-release-2.8/wx/setup.h
/usr/lib/wx/config
/usr/lib/wx/config/gtk2-unicode-release-2.8
/usr/share
/usr/share/doc
/usr/share/doc/libwxgtk2.8-dev
/usr/share/doc/libwxgtk2.8-dev/changelog.gz
/usr/share/doc/libwxgtk2.8-dev/copyright
/usr/share/doc/libwxgtk2.8-dev/changelog.Debian.gz
/usr/lib/libwx_gtk2u_adv-2.8.so
/usr/lib/libwx_gtk2u_aui-2.8.so
/usr/lib/libwx_gtk2u_core-2.8.so
/usr/lib/libwx_gtk2u_fl-2.8.so
/usr/lib/libwx_gtk2u_gizmos-2.8.so
/usr/lib/libwx_gtk2u_gizmos_xrc-2.8.so
/usr/lib/libwx_gtk2u_gl-2.8.so
/usr/lib/libwx_gtk2u_html-2.8.so
/usr/lib/libwx_gtk2u_media-2.8.so
/usr/lib/libwx_gtk2u_ogl-2.8.so
/usr/lib/libwx_gtk2u_plot-2.8.so
/usr/lib/libwx_gtk2u_qa-2.8.so
/usr/lib/libwx_gtk2u_richtext-2.8.so
/usr/lib/libwx_gtk2u_stc-2.8.so
/usr/lib/libwx_gtk2u_svg-2.8.so
/usr/lib/libwx_gtk2u_xrc-2.8.so

$ which wx-config
/usr/local/bin/wx-config

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Am 25.10.2010 05:27, schrieb Philip S.:

$ which wx-config
/usr/lib
/usr/share/doc/libwxgtk2.8-dev/changelog.gz
/usr/lib/libwx_gtk2u_media-2.8.so

It seems you have two wxWidgets installations, one in /usr (that’s that
one from the Ubuntu repos) and one in /usr/local (probably
self-compiled?). /usr/local/bin comes first in PATH, therefore the
wxWidgets installation there is used by wxRuby. Try this:

$ wx-config --prefix
$ /usr/local/bin/wx-config --prefix #Same as above
$ /usr/bin/wxconfig --prefix

and two different wxWidgets prefixes will eventually be shown. Building
on “top of the distro packages” should work fine, so I suggest you to
uninstall the wxWidgets in /usr/local/ either by running

$ sudo make uninstall

in the source directory of the compiled wxWidgets, or, if you don’t have
that source directory anymore, a

$ cd /usr/local
$ find -regex ‘.libwx.’ -or -regex ‘./wx-.’ -or -name wxrc

should list all wxWidgets files under /usr/local. Deleting those
should result in a complete deletion of the wxWidgets installation in
/usr/local. However, do review the list of found files; deleting
something non-wxish unintentionally can cause problems (as you might
imagine). For instance, on my system this shows some Python files:

$ find -regex ‘.libwx.’ -or -regex ‘./wx-.’ -or -name wxrc | grep py
./include/wx-2.8/wx/wxPython/pytree.h
./include/wx-2.8/wx/wxPython/pyistream.h
./include/wx-2.8/wx/wxPython/pydrawxxx.h
./include/wx-2.8/wx/wxPython/pyclasses.h
./share/doc/libwxgtk2.8-dev/copyright
./share/doc/libwxbase2.8-dev/copyright
./share/doc/libwxbase2.8-0/copyright
./share/doc/libwxgtk2.8-0/copyright

Vale,
Marvin
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/

iQEcBAEBAgAGBQJMxXf8AAoJEGrS0YjAWTKV3NQH/1bfYpXOVl3G7cQnBSk2h6gc
+ekR7qKav4B/wSLs3nUH5LxTFm1c1w+lonv1doTrQ/k9/wJsPO75JAgRihyEOijW
NYYXTHsbP+Z8ghDoiMd1COj4wG96+MsGlqPOk3oIkde4H0VzNOdCA48kH6AT7R6X
vwbLrgZ8RjEvrOfOlS+sgSZcbeseEWg/rLTavmxQWBXLhRDlpv9cF2rRvn6PCxaQ
Kmt4gXnibwRFr+xTNJAfqMCFbXoY5FxeLYREPpGsbIXvxvEdHAR5se89Z6Rv9Wfh
snxNtzvo0dfv7DCwINNYh2veKjDaWCBue9Y4bG5HEdUKjoxU1Z11EoFqvXPFuLY=
=Fk/f
-----END PGP SIGNATURE-----

Hello All,

Due to some issues with the setup of 10.10, I’ve been working on getting
a
new version of the wxRuby gems setup, and ready for you all. Currently,
since it was the one requested by Phillip Stephens, I’ve posted a Ruby
1.9
Gem which can be downloaded from
http://www.trilake.net/wxRuby/wxruby-ruby19-2.0.1-x86-linux.gem

This version of the gem, has been compiled to work without wxMediaCtrl
compiled in with the main wxWidgets Library. I will be setting up a new
distro in my Apt repository to upload new versions of the wxRuby library
for
i386 and x86_64, specifically for Maverick Meerkat. I will be setting
up my
64bit install of Ubuntu to host a VM for Lucid Lynx, to get installs for
both 32bit and 64bit versions for 10.04. I apologize for the lateness
in
this post, but I was just able to get everything compiled, and uploaded.

Please bear with me, as I get the repositories setup, and going with
proper
authentication of the source packages, and such.

hth,

Mario

P.S. Installation instructions in a Copy & Paste Method for the Gem:

wget http://www.trilake.net/wxRuby/wxruby-ruby19-2.0.1-x86-linux.gem
sudo gem install wxruby-ruby19-2.0.1-x86-linux.gem

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Am 26.10.2010 20:15, schrieb Mario S.:

distro in my Apt repository to upload new versions of the wxRuby library for
i386 and x86_64, specifically for Maverick Meerkat. I will be setting up my
64bit install of Ubuntu to host a VM for Lucid Lynx, to get installs for
both 32bit and 64bit versions for 10.04. I apologize for the lateness in
this post, but I was just able to get everything compiled, and uploaded.

I’m really interested in how you managed to do a successful compile on
Ubuntu Maverick. I’ve been trying to do that for more than a week now
and still no success (see my previous posts on this lists, e.g. here:
http://www.ruby-forum.com/topic/260671 ). Even if compilation was done
without problems, I was bombed with segfaults when trying to use wxRuby,
even with the minimal sample a click on the “File” menu made Ruby crash.
Could you post some instructions on how to get that working (maybe in a
new thread, as this is not what the OP is trying to do)?

Vale,
Marvin

sudo gem install wxruby-ruby19-2.0.1-x86-linux.gem
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/

iQEcBAEBAgAGBQJMxz+NAAoJEGrS0YjAWTKVKKwH/2GwpoSvR3ur0ZUdi7JjLlhY
iteTvnFlxUXYBJDCIgZkNZUZdRHydIy+HAfdXS2tBwFcejjFp+JCt6l0VTl+LrBw
HjGogxD82xd6Rq+H8TDL0uJF//qtfJaIF2ikXkLnr5+TLmXf0pSpdNKLFp+SMMTS
phPw1zdq5hyli2/gBr79oPPVpGLZzvpDs5VCEsEh7kQMUz40OOeCX5pR1Pe9BH+k
HvKTvOBgI2ciJsyTtsM4CagrLgmO1P76TDmXGnyxG6wIccdJUb9RW1m5RM4+Rs4R
92gTiULh8yLCzqYYjazmSm8tcXIJFK01+5tBA9kCiGHoBonGEuaSJQ54JSO/X9g=
=vUP2
-----END PGP SIGNATURE-----

This forum is not affiliated to the Ruby language, Ruby on Rails framework, nor any Ruby applications discussed here.

| Privacy Policy | Terms of Service | Remote Ruby Jobs