Building GNU Radio on the Beagle board

From time to time people ask about building GNU Radio for the
Beagleboard. In an attempt to make it easier for more people to work on
this, I posted some notes at:

http://www.opensdr.com/node/17

describing how to build GNU Radio on the Beagleboard (obviously building
it cross is much faster, but you need to be aware of some tricky bits).
I know this is all a bit vague, but hopefully someone finds it useful :slight_smile:

If you have Beagle specific questions, please ask those on the
appropriate list/irc channel. I’ll be glad to respond to GNU Radio
specific issues here.

Philip

Hi;

 Sorry , but I am unable to reach get the files from  "GNU radio sdk

from philip at … " (in given adress) is it http adress or do we have
to
request by mail ?

Thanks

On 02/08/2010 04:29 PM, yerebakan wrote:

Hi;

  Sorry , but I am unable to reach get the files from  "GNU radio sdk

from philip at … " (in given adress) is it http adress or do we have to
request by mail ?

Ask by email :slight_smile: This is a very preliminary image atm, as you can tell
from my notes. The process is working for me though and I would
appreciate some testing.

I’ll send you the link in a minute, it is on my DSL line, so the
download speed is not great.

Philip

I believe you’re failing the “human” checker :wink:

Philip is trying to tell you to e-mail him for the files.

  • George

On 02/16/2010 07:15 AM, George N. wrote:

I believe you’re failing the “human” checker :wink:

Philip is trying to tell you to e-mail him for the files.

He did email. Maybe I have him a bad link. Since I am traveling atm,
here is the link:

http://balister.dyndns.org:8008/~balister/gnuradio-image.tar.gz

If your firewall is restrictive, the port may be the problem. Let me
know, and I can move it to my website for a bit.

Philip

Hi;

Sorry again but link is not working. I am unable to download it. Is it
problem because of your ADSL ?

You have a web site but may be openning project in Sourceforge.net can
be
usesful.

Thanks

On Mon, Feb 8, 2010 at 11:34 PM, Philip B.
[email protected]wrote:

my notes. The process is working for me though and I would appreciate some

describing how to build GNU Radio on the Beagleboard (obviously building
Philip


Discuss-gnuradio mailing list
[email protected]
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio

Halid Ziya Yerebakan

Just checking… :slight_smile:

PS. the link works for me

Hi;

My project changed but at the end
I get the image , problem is my University’s firewall they are
allowing
only a few ports because of that I download from another location.

Thanks