10.7 IF output Scanner Suggestions sought

I am hoping somebody can recommend a scanner with a 10.7 MHZ IF output
to connect to the Ettus R. USRP + Basic RX that I just recently
acquired. I googled around and found a couple but I lack experience to
which ones are good. Any suggestions? I am just getting started with
this and I could use some help.

Thanks in advance.

Ranga

AOR makes a good set of radios with IF outputs.

http://www.aorusa.com/b&m.html

High IP3, wide frequency range, and 10MHz BW IF. You can also disable
the
AGC from the front panel.

On Tue, Dec 12, 2006 at 05:55:54PM -0500, M. Ranganathan wrote:

I am hoping somebody can recommend a scanner with a 10.7 MHZ IF output
to connect to the Ettus R. USRP + Basic RX that I just recently
acquired. I googled around and found a couple but I lack experience to
which ones are good. Any suggestions? I am just getting started with
this and I could use some help.

Thanks in advance.
Ranga

You’re going to be hard pressed to beat the price on a TVRX
daughterboard. Also, the code to control it is already written, and
it has a wider IF passband than most scanners.

FWIW, I’ve got a AR8600 with a 10.7 MHz output, but I haven’t had
occasion to used it since Matt started shipping daughterboards that
cover the bands I’m interested in. With a TVRX and DBSRX, you’ve got
coverage from 50 MHz to 2.4 GHz.

Eric