Hi,
When running test_usrp_inband_rx, it gets stuck because it does not
receive any data. Is there a problem with the code in the trunk?
(revision #10191). The USRP is working fine with the legacy code
(e.g. usrp_rx_cfile). Here’s the output of the program (with the
verbose flag set in usrp_server):
[USRP_SERVER] Initializing…
[TEST_USRP_INBAND_RX] Opening the USRP
[TEST_USRP_INBAND_RX] Requesting RX channel allocation
[USRP_SERVER] Checking chan: 0 owner () size 2
[USRP_SERVER] Assigning channel: 0 to rx0
[TEST_USRP_INBAND_RX] Receiving…
[USRP_SERVER] Sending read request down to start recv
Kernel: 2.6.26 for amd64 (tested also with i386)
libusb-0.1: 0.1.12
libc6: 2.7
libstdc++6: 4.3.2
Thanks for your help.
–
Marc Petit-Huguenin
Home: [email protected]
Work: [email protected]