I also want to program the USRP using Simulink. I’m doing a
proof-of-concept type project where I want the FPGA on the USRP to do
some signal processing on it as opposed to the gnu radio software on the
computer. I have never done anything like this before so I’m kind of
lost about where to go. If all I want to do is perform modulation on
the USRP, can I make a model in Simulink and convert it to FPGA code?
Do I need both the Altera DSP Builder and Quartus II to generate verilog
files or what? Any help would be greatly appreciated.
Thank you,
Nick
Content-Type: multipart/alternative;
boundary=“0-1662125268-1171936130=:86179”
Content-Transfer-Encoding: 8bit
–0-1662125268-1171936130=:86179
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 8bit
Dear All
As i have mentioned before i’m trying to program the USRP using
Simulink.
Is there any files should i run first to program the USB interface
Thanks
Ask a question on any topic and get answers from real people. Go to
Yahoo! Answers.
–0-1662125268-1171936130=:86179
Content-Type: text/html; charset=iso-8859-1
Content-Transfer-Encoding: 8bit
Dear All
As i have mentioned before i’m trying to program
the USRP using Simulink.
Is there any files should i run first to
program the USB interface
Thanks
Ask a question on any topic and get answers from real
people. Go to Yahoo!
Answers.
–0-1662125268-1171936130=:86179–