Hi everyone,
I am testing the BER performance of the gmsk of GNURaido with two USRP,
one
as a transmitter, and another as a receiver.
I find that the error bits would cause the subsequent bits getting
error.
The received bits are compared with the transmitted bits, and if one bit
is
received correctly, a ‘0’ is marked at the position, otherwise a ‘1’
marked.
In the following test result, the front part of bits are received
correctly. But I get lots of error bits after some bit which is not
received correctly.
…00000000000000000000000000000000000000000000000000000000010010110110001001110010100010…
How to explain this?
Best regards,
Damon