Forum: GNU Radio UHD Error

6ce2218ad4bfd32567ef8cf1d517d31b?d=identicon&s=25 Nguyễn Văn Lý (Guest)
on 2014-06-28 06:40
(Received via mailing list)
Dear all,

*I am new to gnuradio. I am trying to run an experiment, but I got an
error
as follows:*

UHD Error:
    USB open failed: insufficient permissions.
    See the application notes for your device.
Traceback (most recent call last):
  File "/home/van-ly/GNU_Radio/SDR Implementation of OFDM-based Network
Coding_Project Codes and Files/ofdm_transmitter.py", line 198, in
<module>
    tb = ofdm_transmitter()
  File "/home/van-ly/GNU_Radio/SDR Implementation of OFDM-based Network
Coding_Project Codes and Files/ofdm_transmitter.py", line 67, in
__init__
    channels=range(1),
  File
"/usr/local/lib/python2.7/dist-packages/gnuradio/uhd/__init__.py",
line 121, in constructor_interceptor
    return old_constructor(*args)
  File
"/usr/local/lib/python2.7/dist-packages/gnuradio/uhd/uhd_swig.py",
line 2208, in make
    return _uhd_swig.usrp_sink_make(*args)
RuntimeError: LookupError: KeyError: No devices found for ----->
Empty Device Address

*Then I tried a command (sudo uhd_usrp_probe) to test the UHD
installation
and I got *

linux; GNU C++ version 4.8.1; Boost_104800; UHD_003.005.004-0-unknown

-- Loading firmware image: /usr/local/share/uhd/images/usrp1_fw.ihx...
done
-- Opening a USRP1 device...
-- Loading FPGA image: /usr/local/share/uhd/images/usrp1_fpga.rbf...
done
-- Using FPGA clock rate of 64.000000MHz...
  _____________________________________________________
 /
|       Device: USRP1 Device
|     _____________________________________________________
|    /
|   |       Mboard: USRP1
|   |   serial: 6R2706U1
|   |
|   |   Time sources: none
|   |   Clock sources: internal
|   |   Sensors:
|   |     _____________________________________________________
|   |    /
|   |   |       RX DSP: 0
|   |   |   Freq range: -32.000 to 32.000 Mhz
|   |     _____________________________________________________
|   |    /
|   |   |       RX DSP: 1
|   |   |   Freq range: -32.000 to 32.000 Mhz
|   |     _____________________________________________________
|   |    /
|   |   |       RX Dboard: A
|   |   |     _____________________________________________________
|   |   |    /
|   |   |   |       RX Frontend: 0
|   |   |   |   Name: Unknown (0xffff) - 0
|   |   |   |   Antennas:
|   |   |   |   Sensors:
|   |   |   |   Freq range: 0.000 to 0.000 Mhz
|   |   |   |   Gain Elements: None
|   |   |   |   Connection Type: IQ
|   |   |   |   Uses LO offset: No
|   |   |     _____________________________________________________
|   |   |    /
|   |   |   |       RX Codec: A
|   |   |   |   Name: ad9522
|   |   |   |   Gain range pga: 0.0 to 20.0 step 1.0 dB
|   |     _____________________________________________________
|   |    /
|   |   |       RX Dboard: B
|   |   |   ID: RFX2400 (0x0027)
|   |   |   Serial: E5R12YBR2
|   |   |     _____________________________________________________
|   |   |    /
|   |   |   |       RX Frontend: 0
|   |   |   |   Name: RFX2400 RX
|   |   |   |   Antennas: TX/RX, RX2, CAL
|   |   |   |   Sensors: lo_locked
|   |   |   |   Freq range: 2300.000 to 2900.000 Mhz
|   |   |   |   Gain range PGA0: 0.0 to 70.0 step 0.0 dB
|   |   |   |   Connection Type: QI
|   |   |   |   Uses LO offset: No
|   |   |     _____________________________________________________
|   |   |    /
|   |   |   |       RX Codec: B
|   |   |   |   Name: ad9522
|   |   |   |   Gain range pga: 0.0 to 20.0 step 1.0 dB
|   |     _____________________________________________________
|   |    /
|   |   |       TX DSP: 0
|   |   |   Freq range: -44.000 to 44.000 Mhz
|   |     _____________________________________________________
|   |    /
|   |   |       TX DSP: 1
|   |   |   Freq range: -44.000 to 44.000 Mhz
|   |     _____________________________________________________
|   |    /
|   |   |       TX Dboard: A
|   |   |     _____________________________________________________
|   |   |    /
|   |   |   |       TX Frontend: 0
|   |   |   |   Name: Unknown (0xffff) - 0
|   |   |   |   Antennas:
|   |   |   |   Sensors:
|   |   |   |   Freq range: 0.000 to 0.000 Mhz
|   |   |   |   Gain Elements: None
|   |   |   |   Connection Type: IQ
|   |   |   |   Uses LO offset: No
|   |   |     _____________________________________________________
|   |   |    /
|   |   |   |       TX Codec: A
|   |   |   |   Name: ad9522
|   |   |   |   Gain range pga: -20.0 to 0.0 step 0.1 dB
|   |     _____________________________________________________
|   |    /
|   |   |       TX Dboard: B
|   |   |   ID: RFX2400 (0x002b)
|   |   |   Serial: E5R12YBR2
|   |   |     _____________________________________________________
|   |   |    /
|   |   |   |       TX Frontend: 0
|   |   |   |   Name: RFX2400 TX
|   |   |   |   Antennas: TX/RX, CAL
|   |   |   |   Sensors: lo_locked
|   |   |   |   Freq range: 2300.000 to 2900.000 Mhz
|   |   |   |   Gain Elements: None
|   |   |   |   Connection Type: IQ
|   |   |   |   Uses LO offset: Yes
|   |   |     _____________________________________________________
|   |   |    /
|   |   |   |       TX Codec: B
|   |   |   |   Name: ad9522
|   |   |   |   Gain range pga: -20.0 to 0.0 step 0.1 dB

Can anyone tell me why so? and help me how to fix this error.
Thanks in advance
Van-Ly
Nguyen Van-Ly,
Vietnam National University, Hanoi - VNU
University of Engineering and Technology - UET
Faculty of Electronics and Telecommunications - FET

Tel: +84 978 819 406

Standing on my own two feet !!!
503e7c2961c7debe24eda2c31330759b?d=identicon&s=25 Mike Jameson (Guest)
on 2014-06-28 11:01
(Received via mailing list)
Follow the instructions in section "Setup Udev for USB (Linux)" at the
following URL for you to be able to access your USRP1 with non-root
permissions:

http://files.ettus.com/uhd_docs/manual/html/transp...

An easy way to locate the 'uhd-usrp.rules' file is to run the following:

sudo find / -name uhd-usrp.rules

Mike

--
Mike Jameson M0MIK BSc MIET
Ettus Research Technical Support
Email: support@ettus.com
Web: http://ettus.com


On Sat, Jun 28, 2014 at 5:39 AM, Nguyễn Văn Lý
<lynguyenvan.uet@gmail.com>
Please log in before posting. Registration is free and takes only a minute.
Existing account

NEW: Do you have a Google/GoogleMail, Yahoo or Facebook account? No registration required!
Log in with Google account | Log in with Yahoo account | Log in with Facebook account
No account? Register here.