Simple grc GUI question

GNU Radio
1

Hi,

I need to align the audio switching network of my ham radio repeater
db0fue,
and it would be nice to have some GRC GUI element that allows me to
switch
between two predefined RF frequencies. Never worked with this GUI stuff,
and
I guess finding it out myself probably would take too long :slight_smile: Just need
to
set a 1000 Hz NFM test tone generator that can be switched between
145.0375
and 431.025 MHz with touching a button on my tablet PC screen…if one
could
drop the name of the GUI element that could do the job, the rest should
be
simple enough :slight_smile: I am using latest gnuradio 3.7.something (built from
source) and Kubuntu 13.10.

Sorry for the dumb looking question, but I would love to get this up and
running during lunch break, and drive to the repeater with a rucksack
full
of RF gear this evening and get the deviation issue fixed, before people
start complaining.

Ralph.

–

Ralph A. Schmid
Mondstr. 10
90762 Frth
+49-171-3631223
[email protected]
http://www.bclog.de/

2

The WX GUI Check Box should work for you. It can toggle
between two values. Let me know if you need an example.

Ron

3

Works great, without problems, as expected :slight_smile:

Ralph.

4

OK, this sounds reasonable - when it is able to assign values to buttons
and
put them into a placeholder on button press, then it is exactly what I
need,
and I should be able to use this without an example. I was hoping that
there
is such a simple solution :slight_smile:

Thank you!

Ralph.