Forum: GNU Radio Async Packet Transmission with Unmodulated Carrier

5b7bae5302f715f777bc9f683dea3c77?d=identicon&s=25 Michael Berman (Guest)
on 2013-10-10 20:15
(Received via mailing list)
I am attempting to transmit asynchronous packets in a precise manor
using
time tags, and at the same time transmit an unmodulated carrier while
there
are no packets being sent.  I am considering disconnecting the USRP sink
from the packet path and connecting it to a signal source, however there
are questions of timing involved with knowing when to do this
reconnection.  This design is to digitally phase modulate the carrier of
an
AM signal and therefore cannot have gaps in the carrier signal.  I am
wondering how this all would work with time tagged data and the
unmodulated
carrier, or would these two processes interfere with one another?  Also,
if
it could work, does anybody have any suggestions as to how it should be
implemented?


Thank you in advance for any assistance,

Michael Berman
5b7bae5302f715f777bc9f683dea3c77?d=identicon&s=25 Michael Berman (Guest)
on 2013-10-14 18:41
(Received via mailing list)
What I am attempting to do is build a transmitter and receiver unit for
what the BBC is using for sending broadcast information in association
with
their AM broadcasts.  This is called Amplitude Modulation System
Signalling
(AMSS).  I would like to be a bit more generic than the BBC standards
(allow for dynamic bit rates, allowing unmodulated an carrier, etc.).
Does
anybody know if this has been done using GNURadio?  Is there any
potential
for the community to want a module to perform this task if I implement
one?

Thank you very much,

Michael Berman
Please log in before posting. Registration is free and takes only a minute.
Existing account

NEW: Do you have a Google/GoogleMail, Yahoo or Facebook account? No registration required!
Log in with Google account | Log in with Yahoo account | Log in with Facebook account
No account? Register here.