Forum: GNU Radio How to use tunnel.py to web browse?

Announcement (2017-05-07): www.ruby-forum.com is now read-only since I unfortunately do not have the time to support and maintain the forum any more. Please see rubyonrails.org/community and ruby-lang.org/en/community for other Rails- und Ruby-related community platforms.
9f439a67199b34986c71a6ada12e9870?d=identicon&s=25 Jane Chen (jane)
on 2009-05-12 07:25
(Received via mailing list)
Hi all,
 
On machine A:
The README mentions that I should be able to ssh between the machines,
web browse, etc. I use ifconfig  gr0 xxx.xxx.53.230 and ifconfig  gr0
xxx..xxx.53.229 to give IP addresses to two machines (A and B).  The
machine A connects to the Internet through eth0 with IP
address: xxx.xxx.53.231. The machine B does not connect to the Internet.
I ping xxx.xxx.53.232 (a machines running WinXP), and the terminal shows
follows:
 
ping xxx.xxx.53.232
PING xxx.xxx.53.232 (xxx.xxx.53.232) 56(84) bytes of data.
From xxx.xxx.53.230 icmp_seq=2 Destination Host Unreachable
From xxx.xxx.53.230 icmp_seq=3 Destination Host Unreachable
From xxx.xxx.53.230 icmp_seq=4 Destination Host Unreachable
From xxx.xxx.53.230 icmp_seq=6 Destination Host Unreachable
 
If anyone knows what's wrong in this case or how to do the web browse,
please give me some hints.
 
Thank you so much.
Jane
 
This topic is locked and can not be replied to.