Forum: GNU Radio Analysis_filterbank solution

Announcement (2017-05-07): www.ruby-forum.com is now read-only since I unfortunately do not have the time to support and maintain the forum any more. Please see rubyonrails.org/community and ruby-lang.org/en/community for other Rails- und Ruby-related community platforms.
998dbc3ac73d5487c59c0ee0f5baeeb1?d=identicon&s=25 Sebastiaan Heunis (Guest)
on 2009-01-15 12:27
(Received via mailing list)
Eric

I fixed my filterbank trouble.  You were right when you said that one
needs to connect EVERYTHING.  For instance, let's say you channelised
a signal into 20 channels and you wanted to write channel 5's output
to a file.  Then you need to connect  channels 0-4 to a null sink (or
whatever), as well as channels 6-19.  My previous mistake was to not
connect the higher channels to something.  This results in a correct
output when looking at channel 0 and junk outputs for the rest.

Thanks for all the other help.

Regards

Sebastiaan
This topic is locked and can not be replied to.