I am getting the following: It seems that my sound card wants higher sampling rate From previous post it seems that should not be an issue. But the sound from my FM is broken. Is there a way to fix it? [root@localhost gnuradio-3.1.3]# /usr/local/share/gnuradio/examples/usrp/usrp_wfm_rcvi.py Using RX d'board B: TV Rx Rev 3 audio_alsa_sink[hw:0,0]: unable to support sampling rate 32000 card requested 48000 instead. >>> gr_fir_ccf: using SSE >>> gr_fir_fff: using SSE gr_vmcircbuf_createfilemapping: createfilemapping is not available aUaUaUaUaUaUaUaUaUaUaUaUaUaUaUaUaUaUaUaUaUaUaU -- ~Inderaj
on 2008-11-02 01:40
on 2008-11-02 07:47
On Sat, Nov 1, 2008 at 7:39 PM, Inderaj B. <email@example.com> wrote: > aUaUaUaUaUaUaUaUaUaUaUaUaUaUaUaUaUaUaUaUaUaUaU Also, what is this? I see it on some apps and not others. It appears to be a feature of python's raw_input() except that it only happens while the alsa audio stuff is loaded. I couldn't figure it out and imagined it was peculiar to my platform. -- If riding in an airplane is flying, then riding in a boat is swimming. 107 jumps, 43.5 minutes of freefall, 83.4 freefall miles.
on 2008-11-02 19:43
please read http://gnuradio.org/trac/wiki/UsrpFAQ/Gen#OUuainoutput aU means "audio underrun", which means the soundcard was waiting for data and did not receive any.. concerning the sampling rate and usrp_wfm_rcv.py, try running it with the -O plughw:0,0 option... tell me if this fixed it... Dimitris S. "If you think you're too small to make a difference, try sleeping with a mosquito!" - Amnesty International