Forum: GNU Radio Need information

Announcement (2017-05-07): www.ruby-forum.com is now read-only since I unfortunately do not have the time to support and maintain the forum any more. Please see rubyonrails.org/community and ruby-lang.org/en/community for other Rails- und Ruby-related community platforms.
31ba694ba2d09a0f09baac4befa0e886?d=identicon&s=25 Prasant Misra (Guest)
on 2008-11-01 03:24
(Received via mailing list)
Hi,



I am not very familiar with GNU radio but have a basic working idea
about it.

I wanted to know if it is possible to catch sound signal from a source
and then feed it to the system for signal processing. To be very
specific, are there any additional daughter boards that come with USRP
that come with a microphone that can convert these sound signals to
electronics pulses that can then used for processing the signals.

Or is there a socket on the USRP where we can plug in a microphone that
takes care to achieve the above functionality.

Please suggest.



Thanks.



Prasant Kumar Misra.
4252201ac30d6dd44d8090ce1070e35f?d=identicon&s=25 Josh Blum (Guest)
on 2008-11-01 04:12
(Received via mailing list)
If you just want to sample the audio from a microphone, the best option
is to use the computer's built-in sound card. Gnuradio has a signal
processing block called audio.source that reads samples from the mic or
line-in port of a sound card.

If you still want to use the USRP, you will want the LFRX daughter board
to sample baseband audio. The board has an SMA connector, not an audio
jack, so you may have to stick a wire in somewhere and solder something.

_j0sh
This topic is locked and can not be replied to.