Forum: GNU Radio setting the center frequency for FLEX2400s

Announcement (2017-05-07): is now read-only since I unfortunately do not have the time to support and maintain the forum any more. Please see and for other Rails- und Ruby-related community platforms.
Ac73d95c8ccddff9ecae369bcb80a923?d=identicon&s=25 George Nychis (Guest)
on 2007-07-17 21:53
(Received via mailing list)
Hey all,

So, our inband code transmits and receives just fine using the basic
TX/RX boards at 10MHz.  We want to run it using the FLEX2400
daughtercards at 2.4GHz.

Using and the oscope, we can generate a sine at 2.4GHz
and watch it.

I believe the center frequency is hardcoded right now in the USRP
interface m-block:

That's where we set the center frequency of channel 0 to 10MHz.

When I switch this to 24e8, set_tx_freq returns an error while using a
2.4GHz daughtercard.  It does *not* return an error setting the center
freq to 10MHz while using the 2.4GHz daughtercards... so I'm confused.

Thanks :)

- George
This topic is locked and can not be replied to.