Forum: GNU Radio error loading usrp firmware

Announcement (2017-05-07): is now read-only since I unfortunately do not have the time to support and maintain the forum any more. Please see and for other Rails- und Ruby-related community platforms.
8d06bfa4aa21e473dc0b709489fe2a02?d=identicon&s=25 sitec (Guest)
on 2007-05-14 21:29
(Received via mailing list)
Hi there.
I am trying to make work my usrp.

after running anything using usrp (for example i get
this error mesasge:
RuntimeError: Unable to find USRP #0

Probably i don't have firmware installed.
after connecting power, right (closer to usb) LED is blinking at 2 Hz.

So i tried 'usrper load_firmware /usr/share/usrp/rev4/std.ihx'
i got message: 'usrper: found unconfigured usrp; needs firmware.'

LED blinging changed to 1 Hz.

usrper always return message 'failed to find usrp' :

root@ubuntu:/home/mato# usrper load_firmware
usrper: failed to find usrp[0]
root@ubuntu:/home/mato# usrper load_fpga
usrper: failed to find usrp[0]
root@ubuntu:/home/mato# usrper led0 on
usrper: failed to find usrp[0]

after unplugging and plugging again power, LED always start to blinking
at 2 hz.

am i doing something wrong?
during test, no boards were connected to the board.

thanks for help.

This topic is locked and can not be replied to.