Hi there. I am trying to make work my usrp. after running anything using usrp (for example usrp_oscope.py) i get this error mesasge: RuntimeError: Unable to find USRP #0 Probably i don't have firmware installed. after connecting power, right (closer to usb) LED is blinking at 2 Hz. So i tried 'usrper load_firmware /usr/share/usrp/rev4/std.ihx' i got message: 'usrper: found unconfigured usrp; needs firmware.' LED blinging changed to 1 Hz. usrper always return message 'failed to find usrp' : root@ubuntu:/home/mato# usrper load_firmware /usr/share/usrp/rev4/std.ihx usrper: failed to find usrp root@ubuntu:/home/mato# usrper load_fpga /usr/share/usrp/rev4/std_2rxhb_2tx.rbf usrper: failed to find usrp root@ubuntu:/home/mato# usrper led0 on usrper: failed to find usrp after unplugging and plugging again power, LED always start to blinking at 2 hz. am i doing something wrong? during test, no boards were connected to the board. thanks for help. Sitec.
on 2007-05-14 21:26