Does there anybody installs the ActiveRbac successfully on windows? and
could you share your experience with me? Thanks.
Hi,
You may have better luck posting this question on the ActiveRBAC list
itself: https://lists.cloudcore.com/mailman/listinfo/rbac-dev
HTH,
James
Captain F. wrote:
Does there anybody installs the ActiveRbac successfully on windows? and
could you share your experience with me? Thanks.
Hi,
what version of ActiveRbac do you want to install?
Because ActiveRBAC is a rails or engines plugin, there a no windows
specific issues I know so far.
There is a version for Rails 1.1.x, which requires engines 1.1, and as
well a version for Rails 1.2, which requires engines 1.2. The last
version is for Rails 1.2 and doesn’t need engines, but has less
functionalities than the earlier versions.
I have all versions running on Windows without a problem. So I would be
nice, that you specify your troubles a little more.
Thanks
Hi, Kosmas:
Finally i fix that problem. I made such a stupid mistake! The
version ActiveRbac0.3.2 can only run under rails 1.1!
Then i download the 0.4.1 version with engines 1.2 and put into
my project, everything is ok now:) It’s not the problem of windows,
actually , it’s my stupid mistake…
Thanks anyway!
cheers
captain
Kosmas wrote:
Captain F. wrote:
Does there anybody installs the ActiveRbac successfully on windows? and
could you share your experience with me? Thanks.Hi,
what version of ActiveRbac do you want to install?
Because ActiveRBAC is a rails or engines plugin, there a no windows
specific issues I know so far.There is a version for Rails 1.1.x, which requires engines 1.1, and as
well a version for Rails 1.2, which requires engines 1.2. The last
version is for Rails 1.2 and doesn’t need engines, but has less
functionalities than the earlier versions.I have all versions running on Windows without a problem. So I would be
nice, that you specify your troubles a little more.Thanks
Thanks Kosmas 
My version is ActiveRbac 0.3.2, and can this version run without an
engine? If so, can you show me you configuration by example?
I just follew the instruction of the ActiveRbacManual bellow:
https://activerbac.turingstudio.com/releases/ActiveRbacManual.pdf
My rails version is 1.2.3, ruby 1.8.6, engines 1.2
I have tried for a few days but still failed…
when i execute: rake --trace i have suche exception:
D:/Rails-Project/test/config/environment.rb:84: undefined method
config' for Ac tiveRbacConfig:Module (NoMethodError) from d:/ruby/lib/ruby/site_ruby/1.8/rubygems/custom_require.rb:27:in ge
m_original_require’
from
d:/ruby/lib/ruby/site_ruby/1.8/rubygems/custom_require.rb:27:in re quire' from ./test/functional/../test_helper.rb:2 from d:/ruby/lib/ruby/site_ruby/1.8/rubygems/custom_require.rb:27:in ge
m_original_require’
from
d:/ruby/lib/ruby/site_ruby/1.8/rubygems/custom_require.rb:27:in re quire' from ./test/functional/album_categories_controller_test.rb:1 from d:/ruby/lib/ruby/gems/1.8/gems/rake-0.7.2/lib/rake/rake_test_loader .rb:5:in load’
from
d:/ruby/lib/ruby/gems/1.8/gems/rake-0.7.2/lib/rake/rake_test_loader
.rb:5
from
d:/ruby/lib/ruby/gems/1.8/gems/rake-0.7.2/lib/rake/rake_test_loader
.rb:5:in `each’
from
d:/ruby/lib/ruby/gems/1.8/gems/rake-0.7.2/lib/rake/rake_test_loader
.rb:5
here is my configuration in environment.rb(just follow the
ActiveRbacManual)
###########
module ActiveRbacConfig
config :controller_layout, ‘articles’
end
Engines.create_logger
Engines.start:active_rbac
###########
And you said you had no problem in each version, so can you tell me the
exactly detail? such as active_rbac0.3.2 can run under which version of
engines, rails?
If engines is unneccessary, then how to configure the environment.rb to
protect my controller?
Anyway, thank you for your reply:)
Regards.
captain