# X310 NI 2940R on Linux **URL:** \ **Category:** GNU Radio\ **Created:** [February 19, 2015, 9:36pm UTC](https://www.ruby-forum.com/t/x310-ni-2940r-on-linux/234269 "2015-02-19T21:36:59Z")\ **Posts on this page:** 1\ **Page:** 1
**Author:** ![addis\_a](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/a/c4cdca/32.png) [@addis\_a](https://www.ruby-forum.com/u/addis_a)\ **Post date:** [February 19, 2015, 9:36pm UTC](https://www.ruby-forum.com/t/x310-ni-2940r-on-linux/234269/1 "2015-02-19T21:36:59Z")
i have NI USRP 2940R i.e x310 connected to machine running Ubuntu 14.04 via SFP port 0.What are these warning about x300 is not defined also the tuned frequency is 000000MHz instead of have having a set target frequency. usrp\_x3xx\_fpga\_burner --addr=192.168.10.2 --fpga-path /home/XXXXXX/Downloads/uhd-images\_003.008.001-release/share/uhd/images/usrp\_x310\_fpga\_HGS.bit Attempting to find device…UHD Warning: X300 unknown product code in EEPROM: 2104 UHD Warning: X300 unknown product code in EEPROM: 2104found!Successfully burned FPGA image! UHD Warning: Tune Request: 802.500000 MHz The requested RX frequency is outside of the system range, and has been clipped: Target Frequency: 802.500000 MHz Clipped Target Frequency: 0.000000 MHz Successfully tuned to 0.000000 MHz linux; GNU C++ version 4.8.2; Boost\_105400; UHD\_003.008.002-83-g09c9c6bb UHD Warning: X300 unknown product code in EEPROM: 2104 UHD Warning: X300 unknown product code in EEPROM: 2104-- X300 initialization sequence…-- Determining maximum frame size… 1472 bytes.-- Setup basic communication…-- Loading values from EEPROM… UHD Warning: X300 unknown product code in EEPROM: 2104-- Setup RF frontend clocking…-- Radio 1x clock:200-- Initialize Radio control…-- Performing register loopback test… pass UHD Warning: Unknown transceiver board ID combination. Is your daughter-board mounted properly? RX dboard ID: Unknown (0xffff) TX dboard ID: WBX v4 (0x0062)-- Performing register loopback test… pass UHD Warning: Unknown transceiver board ID combination. Is your daughter-board mounted properly? RX dboard ID: Unknown (0xffff) TX dboard ID: WBX + Simple GDB, WBX v3 + Simple GDB, WBX v4 + Simple GDB, WBX-120 + Simple GDB (0x004f)-- Initializing clock and time using internal sources… done \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_ /| Device: X-Series Device| \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_| /| | Mboard: X300?| | revision: 255| | product: 2104| | mac-addr0: 00:80:2f:0a:f5:0c| | mac-addr1: 10:80:2f:0a:f5:0d| | gateway: 192.168.10.1| | ip-addr0: 192.168.10.2| | subnet0: 255.255.255.0| | ip-addr1: 192.168.20.2| | subnet1: 255.255.255.0| | ip-addr2: 192.168.30.2| | subnet2: 255.255.255.0| | ip-addr3: 192.168.40.2| | subnet3: 255.255.255.0| | serial: F54E25| | FW Version: 3.0| | FPGA Version: 9.0| | | | Time sources: internal, external, gpsdo| | Clock sources: internal, external, gpsdo| | Sensors: ref\_locked| | \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_| | /| | | RX DSP: 0| | | Freq range: -100.000 to 100.000 MHz| | \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_| | /| | | RX DSP: 1| | | Freq range: -100.000 to 100.000 MHz| | \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_| | /| | | RX Dboard: A| | | \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_| | | /| | | | RX Frontend: 0| | | | Name: Unknown (0xffff) - 0| | | | Antennas: | | | | Sensors: | | | | Freq range: 0.000 to 0.000 MHz| | | | Gain Elements: None| | | | Connection Type: IQ| | | | Uses LO offset: No| | | \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_| | | /| | | | RX Codec: A| | | | Name: ads62p48| | | | Gain range digital: 0.0 to 6.0 step 0.5 dB| | \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_| | /| | | RX Dboard: B| | | \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_| | | /| | | | RX Frontend: 0| | | | Name: Unknown (0xffff) - 0| | | | Antennas: | | | | Sensors: | | | | Freq range: 0.000 to 0.000 MHz| | | | Gain Elements: None| | | | Connection Type: IQ| | | | Uses LO offset: No| | | \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_| | | /| | | | RX Codec: B| | | | Name: ads62p48| | | | Gain range digital: 0.0 to 6.0 step 0.5 dB| | \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_| | /| | | TX DSP: 0| | | Freq range: -100.000 to 100.000 MHz| | \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_| | /| | | TX DSP: 1| | | Freq range: -100.000 to 100.000 MHz| | \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_| | /| | | TX Dboard: A| | | ID: WBX v4 (0x0062)| | | Serial: F52CA2| | | \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_| | | /| | | | TX Frontend: 0| | | | Name: WBX v4 (0x0062) - 0| | | | Antennas: | | | | Sensors: | | | | Freq range: 0.000 to 0.000 MHz| | | | Gain Elements: None| | | | Connection Type: IQ| | | | Uses LO offset: No| | | \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_| | | /| | | | TX Codec: A| | | | Name: ad9146| | | | Gain Elements: None| | \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_| | /| | | TX Dboard: B| | | ID: WBX v4 (0x0062)| | | Serial: F52C70| | | ID: WBX + Simple GDB, WBX v3 + Simple GDB, WBX v4 + Simple GDB, WBX-120 + Simple GDB (0x004f)| | | Serial: F50B5E| | | \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_| | | /| | | | TX Frontend: 0| | | | Name: WBX + Simple GDB, WBX v3 + Simple GDB, WBX v4 + Simple GDB, WBX-120 + Simple GDB (0x004f) - 0| | | | Antennas: | | | | Sensors: | | | | Freq range: 0.000 to 0.000 MHz| | | | Gain Elements: None| | | | Connection Type: IQ| | | | Uses LO offset: No| | | \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_| | | /| | | | TX Codec: B| | | | Name: ad9146| | | | Gain Elements: None Regards Muhammad JunaidR&D DepartmentNRTC Haripur KPK+92-995666617+92-3335975856www.[http://junaidmuhammad.webs.com/](http://junaidmuhammad.webs.com/)