# Wxruby, XRC, DialogBlock

**URL:** <https://www.ruby-forum.com/t/wxruby-xrc-dialogblock/131055>\
**Category:** wxRuby\
**Created:** [March 5, 2008, 5:27pm UTC](https://www.ruby-forum.com/t/wxruby-xrc-dialogblock/131055 "2008-03-05T17:27:16Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![joshualef](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/j/5fc32e/32.png) [@joshualef](https://www.ruby-forum.com/u/joshualef)\
**Post date:** [March 5, 2008, 5:27pm UTC](https://www.ruby-forum.com/t/wxruby-xrc-dialogblock/131055/1 "2008-03-05T17:27:16Z")

</div>

I’ve been trying to figure out the best method for generating GUI’s with  
Ruby. I ended up using DialogBlock because it seems like the fastest  
way. But not I have to work backwards and have not done this before.  
How do I go from the file I generate in DialogBlock to a code in Ruby?

---

<div class="post-metadata">

**Author:** ![joshualef](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/j/5fc32e/32.png) [@joshualef](https://www.ruby-forum.com/u/joshualef)\
**Post date:** [March 5, 2008, 5:42pm UTC](https://www.ruby-forum.com/t/wxruby-xrc-dialogblock/131055/2 "2008-03-05T17:42:57Z")

</div>

Joshua L. wrote:

> I’ve been trying to figure out the best method for generating GUI’s with  
> Ruby. I ended up using DialogBlock because it seems like the fastest  
> way. But not I have to work backwards and have not done this before.  
> How do I go from the file I generate in DialogBlock to a code in Ruby?

The wxruby example samples/xrc/xrc\_sample.rb shows how to load an  
XRC-based layout into a wxRuby program.

To save time, I also recommend that you have a look at the tool  
‘xrcise’. This automatically creates ruby code to load XRC layouts and  
link to specific controls within the XML file:

[http://wxruby.rubyforge.org/wiki/wiki.pl?UsingXRCise](http://wxruby.rubyforge.org/wiki/wiki.pl?UsingXRCise)

alex

---

<div class="post-metadata">

**Author:** ![joshualef](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/j/5fc32e/32.png) [@joshualef](https://www.ruby-forum.com/u/joshualef)\
**Post date:** [March 6, 2008, 6:10am UTC](https://www.ruby-forum.com/t/wxruby-xrc-dialogblock/131055/3 "2008-03-06T06:10:16Z")

</div>

Alex F. wrote:

> The wxruby example samples/xrc/xrc\_sample.rb shows how to load an  
> XRC-based layout into a wxRuby program.
> 
> To save time, I also recommend that you have a look at the tool  
> ‘xrcise’.  
> alex

Thanks for your help. I am slowly learning how to do this.

I followed your suggestions. I am able to generate the XRC file from  
DialogBLock. Then, I am able to generate the my\_frame.rb file. But,  
when I try to integrate it by using the code posted on the tutorial in  
the creating a code in SciTE. I get the following syntax error in two  
lines of the source:

syntax error, unexpected ‘\n’, expecting tCOLON2 or ‘[’ or ‘.’

I tried figuring out how to change the code myself to resolve this  
error, but I’m just not good enough…yet

---

<div class="post-metadata">

**Author:** ![joshualef](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/j/5fc32e/32.png) [@joshualef](https://www.ruby-forum.com/u/joshualef)\
**Post date:** [March 6, 2008, 9:42am UTC](https://www.ruby-forum.com/t/wxruby-xrc-dialogblock/131055/4 "2008-03-06T09:42:57Z")

</div>

Joshua L. wrote:

> I get the following syntax error in two  
> lines of the source:
> 
> syntax error, unexpected ‘\n’, expecting tCOLON2 or ‘[’ or ‘.’

Please could you post your XRC file and the generated code. Thanks.

alex

---

<div class="post-metadata">

**Author:** ![joshualef](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/j/5fc32e/32.png) [@joshualef](https://www.ruby-forum.com/u/joshualef)\
**Post date:** [March 6, 2008, 7:09pm UTC](https://www.ruby-forum.com/t/wxruby-xrc-dialogblock/131055/5 "2008-03-06T19:09:19Z")

</div>

> Joshua L. wrote:
> 
> > syntax error, unexpected ‘\n’, expecting tCOLON2 or ‘[’ or ‘.’  
> > Please could you post your XRC file and the generated code. Thanks.

Alex, here’s the code (from the XRCise tutorial)

* * *

require ‘wx’

# load in the generated code

require ‘my\_frame’

# Mix-in for a Wx::TextCtrl

module CaseChangeTextCtrl?

# convert all the text in the control to upper case

def upcase!  
self.value = self.value.upcase  
end

# convert all the text in the control to lower case

def downcase!  
self.value = self.value.downcase  
end  
end

# Inherit from the generated base class and set up event handlers

class CaseChangeFrame? \< TextFrameBase?  
def initialize  
super  
evt\_button(upper\_bt) { text\_box.upcase! }  
evt\_button(lower\_bt) { text\_box.downcase! }  
end  
end

# Run the class

## Wx::App.run do CaseChangeFrame?.new.show end

Josh

---

<div class="post-metadata">

**Author:** ![joshualef](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/j/5fc32e/32.png) [@joshualef](https://www.ruby-forum.com/u/joshualef)\
**Post date:** [March 6, 2008, 10:54pm UTC](https://www.ruby-forum.com/t/wxruby-xrc-dialogblock/131055/6 "2008-03-06T22:54:13Z")

</div>

Joshua L. wrote:

> Alex, here’s the code (from the XRCise tutorial)
> 
> * * *
> 
> require ‘wx’
> 
> # load in the generated code
> 
> require ‘my\_frame’
> 
> # Mix-in for a Wx::TextCtrl
> 
> module CaseChangeTextCtrl?

Ah, sorry, looks like the wiki has mangled some of the ruby code by  
adding ? - there shouldn’t be one here. I’ve corrected the formatting on  
the wiki, can you try to copy and paste again please?

thanks  
alex

---

<div class="post-metadata">

**Author:** ![joshualef](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/j/5fc32e/32.png) [@joshualef](https://www.ruby-forum.com/u/joshualef)\
**Post date:** [March 7, 2008, 12:21am UTC](https://www.ruby-forum.com/t/wxruby-xrc-dialogblock/131055/7 "2008-03-07T00:21:52Z")

</div>

Hi,

On 06.03.2008, at 23:22, Joshua L. wrote:

> I gave it another shot and it still wasn’t working. So, I tried  
> removing all of the ‘?’ characters from the ruby source code. This  
> worked, but I don’t see any buttons. My question is, the wiki page  
> shows ‘?’ characters for working in the DialogBlock and for the ruby  
> source. Perhaps just clarifying where a ‘?’ does and doesn’t belong  
> will fix everything.

? is just a wiki link for creating a new page for CaseChangeTextCtrl.  
The wiki editor has to quote the wiki-text. If it’s a TWiki then you  
should  
quote it with ‘!’: !CaseChangeTextCtrl (IIRC).

## hth. regards, sandor

---

<div class="post-metadata">

**Author:** ![joshualef](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/j/5fc32e/32.png) [@joshualef](https://www.ruby-forum.com/u/joshualef)\
**Post date:** [March 6, 2008, 11:22pm UTC](https://www.ruby-forum.com/t/wxruby-xrc-dialogblock/131055/8 "2008-03-06T23:22:46Z")

</div>

> > require ‘wx’
> > 
> > # load in the generated code
> > 
> > require ‘my\_frame’
> > 
> > # Mix-in for a Wx::TextCtrl
> > 
> > module CaseChangeTextCtrl?
> 
> Ah, sorry, looks like the wiki has mangled some of the ruby code by  
> adding ? - there shouldn’t be one here. I’ve corrected the formatting on  
> the wiki, can you try to copy and paste again please?
> 
> thanks  
> alex

I gave it another shot and it still wasn’t working. So, I tried  
removing all of the ‘?’ characters from the ruby source code. This  
worked, but I don’t see any buttons. My question is, the wiki page  
shows ‘?’ characters for working in the DialogBlock and for the ruby  
source. Perhaps just clarifying where a ‘?’ does and doesn’t belong  
will fix everything.

Still, for a really green programmer, just getting it to work at all was  
very satisfying. If I complete this project, I hope to have something  
to give back to the open source community.

Thanks!

---

<div class="post-metadata">

**Author:** ![joshualef](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/j/5fc32e/32.png) [@joshualef](https://www.ruby-forum.com/u/joshualef)\
**Post date:** [March 7, 2008, 1:26am UTC](https://www.ruby-forum.com/t/wxruby-xrc-dialogblock/131055/9 "2008-03-07T01:26:40Z")

</div>

Alex F. wrote:

> Joshua L. wrote:
> 
> > I gave it another shot and it still wasn’t working. So, I tried  
> > removing all of the ‘?’ characters from the ruby source code. This  
> > worked, but I don’t see any buttons. My question is, the wiki page  
> > shows ‘?’ characters for working in the DialogBlock and for the ruby  
> > source. Perhaps just clarifying where a ‘?’ does and doesn’t belong  
> > will fix everything.  
> > REalised I hadn’t saved the changes to the wiki page. The source code  
> > should be correct now without ‘?’
> 
> alex

The code works, but I still do not see the buttons in the window that I  
produce. I followed the wiki as instructed from start to finish. Is  
there some functionality I was supposed to give to the buttons that  
perhaps I didn’t?

---

<div class="post-metadata">

**Author:** ![joshualef](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/j/5fc32e/32.png) [@joshualef](https://www.ruby-forum.com/u/joshualef)\
**Post date:** [March 7, 2008, 1:15am UTC](https://www.ruby-forum.com/t/wxruby-xrc-dialogblock/131055/10 "2008-03-07T01:15:17Z")

</div>

Joshua L. wrote:

> I gave it another shot and it still wasn’t working. So, I tried  
> removing all of the ‘?’ characters from the ruby source code. This  
> worked, but I don’t see any buttons. My question is, the wiki page  
> shows ‘?’ characters for working in the DialogBlock and for the ruby  
> source. Perhaps just clarifying where a ‘?’ does and doesn’t belong  
> will fix everything.  
> REalised I hadn’t saved the changes to the wiki page. The source code  
> should be correct now without ‘?’

alex

---

<div class="post-metadata">

**Author:** ![joshualef](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/j/5fc32e/32.png) [@joshualef](https://www.ruby-forum.com/u/joshualef)\
**Post date:** [March 7, 2008, 1:35am UTC](https://www.ruby-forum.com/t/wxruby-xrc-dialogblock/131055/11 "2008-03-07T01:35:49Z")

</div>

Joshua L. wrote:

> The code works, but I still do not see the buttons in the window that I  
> produce. I followed the wiki as instructed from start to finish. Is  
> there some functionality I was supposed to give to the buttons that  
> perhaps I didn’t?  
> Your buttons and the textctrl need to be arranged in a Sizer. In  
> DialogBlocks you should see in the palette of addable elements a  
> “Sizers” tab. Add a vertical sizer to the main frame. Then, in order,  
> add the TextCtrl and the two buttons to it.

I guess the tutorial should be more explicit about this but I’d think  
that the result you have at the moment doesn’t look right in the preview  
shown in DialogBlocks?

alex

---

<div class="post-metadata">

**Author:** ![joshualef](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/j/5fc32e/32.png) [@joshualef](https://www.ruby-forum.com/u/joshualef)\
**Post date:** [March 7, 2008, 1:48am UTC](https://www.ruby-forum.com/t/wxruby-xrc-dialogblock/131055/12 "2008-03-07T01:48:58Z")

</div>

Alex F. wrote:

> Joshua L. wrote:
> 
> > The code works, but I still do not see the buttons in the window that I  
> > produce. I followed the wiki as instructed from start to finish. Is  
> > there some functionality I was supposed to give to the buttons that  
> > perhaps I didn’t?  
> > Your buttons and the textctrl need to be arranged in a Sizer. In  
> > DialogBlocks you should see in the palette of addable elements a  
> > “Sizers” tab. Add a vertical sizer to the main frame. Then, in order,  
> > add the TextCtrl and the two buttons to it.
> 
> I guess the tutorial should be more explicit about this but I’d think  
> that the result you have at the moment doesn’t look right in the preview  
> shown in DialogBlocks?
> 
> alex

I’ll play with it and I think I can figure it out from what you wrote.  
I think these types of problems–where you’re not explicit about  
something–is more an issue for people like me who are really new to  
programming and trying to teach themselves everything. People who have  
experience with programming probably would have picked up on this issue.  
I’ll let you know the results. Thanks.

---

<div class="post-metadata">

**Author:** ![joshualef](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/j/5fc32e/32.png) [@joshualef](https://www.ruby-forum.com/u/joshualef)\
**Post date:** [March 7, 2008, 2:36am UTC](https://www.ruby-forum.com/t/wxruby-xrc-dialogblock/131055/13 "2008-03-07T02:36:35Z")

</div>

> > Your buttons and the textctrl need to be arranged in a Sizer. In  
> > DialogBlocks you should see in the palette of addable elements a  
> > “Sizers” tab. Add a vertical sizer to the main frame. Then, in order,  
> > add the TextCtrl and the two buttons to it.

SUCCESS!

Now, I just have to understand it all and get to my own code.

Thanks for your help. I was just about ready to throw in the towel.  
Help and OCD prevail.

---

<div class="post-metadata">

**Author:** ![joshualef](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/j/5fc32e/32.png) [@joshualef](https://www.ruby-forum.com/u/joshualef)\
**Post date:** [March 7, 2008, 5:49am UTC](https://www.ruby-forum.com/t/wxruby-xrc-dialogblock/131055/14 "2008-03-07T05:49:07Z")

</div>

Joshua L. wrote:

> SUCCESS!
> 
> Now, I just have to understand it all and get to my own code.
> 
> Thanks for your help. I was just about ready to throw in the towel.

Great, glad it worked out. Feel free to ask for help; this is a friendly  
list for people with all levels of experience

Good luck  
alex

---

<div class="post-metadata">

**Author:** ![joshualef](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/j/5fc32e/32.png) [@joshualef](https://www.ruby-forum.com/u/joshualef)\
**Post date:** [March 8, 2008, 5:25am UTC](https://www.ruby-forum.com/t/wxruby-xrc-dialogblock/131055/15 "2008-03-08T05:25:46Z")

</div>

Alex F. wrote:

> Joshua L. wrote:
> 
> > SUCCESS!
> > 
> > Now, I just have to understand it all and get to my own code.
> > 
> > Thanks for your help. I was just about ready to throw in the towel.
> 
> Great, glad it worked out. Feel free to ask for help; this is a friendly  
> list for people with all levels of experience
> 
> Good luck  
> alex

I tried to move on to apply what I learned and make my own simple  
application. I started off more simple than the XRCise tutorial  
example, just creating a frame through DialogBlock, then applied XRCise.  
When I get to writing the ruby source code that mixes in the ruby class  
file generated from XRCise, I get nowhere. I’m thinking that I’m not  
just going to be able to pick this up as easily as I hoped and was  
wondering if there are particular books (or chapters of books) or  
websites I should be looking at to learn the basics–with respect to  
GUI. I have the “pickaxe”, the Ruby Way (and a couple of others), and  
I’ve been all over the web, so I have a general feel for all the info  
that’s out there–there’s so much out there, I’m not sure what to focus  
on at this point. Any advice is much appreciated.

---

<div class="post-metadata">

**Author:** ![joshualef](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/j/5fc32e/32.png) [@joshualef](https://www.ruby-forum.com/u/joshualef)\
**Post date:** [March 9, 2008, 7:07am UTC](https://www.ruby-forum.com/t/wxruby-xrc-dialogblock/131055/16 "2008-03-09T07:07:51Z")

</div>

Mario S. wrote:

> Hello Joshua,
> 
> May I inquire as to the reasoning behind needing to use DialogBlocks?  
> Is it  
> purely so that you can see instantly what is being created, or  
> reusability,  
> etc, etc, etc? I might recommend, till you get yourself comfortable  
> with  
> wxRuby, that you try building frames, and user interfaces by hand,  
> through  
> actual Ruby Code. But if you absolutely need to have a User Interface  
> generated by DialogBlocks, and xrcise is not working for you… Can you  
> explain what the problem is more specifically?
> 
> A lot of times, when building interfaces with XRC, you need to know what  
> you  
> are doing, and how xrcise is going to translate that into Ruby code for  
> you.
> 
> L8ers,

Mario, thanks for the input. I do need to have a GUI for my final app,  
but it doesn’t have to be via DialogBlocks/XRCise. I guess my question  
is, if I learn about GUI in say Tk, how easily will i be able to apply  
that to any of the other GUI aps–fxruby, wxruby, etc.?

---

<div class="post-metadata">

**Author:** ![joshualef](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/j/5fc32e/32.png) [@joshualef](https://www.ruby-forum.com/u/joshualef)\
**Post date:** [March 9, 2008, 6:25am UTC](https://www.ruby-forum.com/t/wxruby-xrc-dialogblock/131055/17 "2008-03-09T06:25:19Z")

</div>

Hello Joshua,

May I inquire as to the reasoning behind needing to use DialogBlocks?  
Is it  
purely so that you can see instantly what is being created, or  
reusability,  
etc, etc, etc? I might recommend, till you get yourself comfortable  
with  
wxRuby, that you try building frames, and user interfaces by hand,  
through  
actual Ruby Code. But if you absolutely need to have a User Interface  
generated by DialogBlocks, and xrcise is not working for you… Can you  
explain what the problem is more specifically?

A lot of times, when building interfaces with XRC, you need to know what  
you  
are doing, and how xrcise is going to translate that into Ruby code for  
you.

L8ers,

---

<div class="post-metadata">

**Author:** ![joshualef](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/j/5fc32e/32.png) [@joshualef](https://www.ruby-forum.com/u/joshualef)\
**Post date:** [March 9, 2008, 7:57am UTC](https://www.ruby-forum.com/t/wxruby-xrc-dialogblock/131055/18 "2008-03-09T07:57:18Z")

</div>

Hello Joshua,

On 3/9/08, Joshua L. [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid) wrote:

> Mario, thanks for the input. I do need to have a GUI for my final app,  
> but it doesn’t have to be via DialogBlocks/XRCise. I guess my question  
> is, if I learn about GUI in say Tk, how easily will i be able to apply  
> that to any of the other GUI aps–fxruby, wxruby, etc.?

Just a note, but when reffering to other GUI Toolkits, like Tk, FXRuby  
and  
wxRuby, they are technically GUI Libraries. As to your particular  
question,  
I strongly, very very strongly recommend staying with 1 GUI Toolkit.  
The  
reason for this, is that each GUI Toolkit library has it’s own API  
Interface, it’s own set of Controls, it’s own way of handling Events  
that  
come from the GUI elements. Also, there’s certain advantages and  
dis-advantages to using each Toolkit. Tk, is a very low level GUI  
Toolkit,  
and heavily relies on having the TK/TCL Framework installed along side  
Ruby  
in order to work. GUI Apps that are created with TK, do not truely have  
a  
native OS feel to it, and can tend to be over-complicated.

FXRuby, has a Single GUI Look and Feel, so it’s garunteed to look the  
same  
across all platforms, though that is not always a good thing. The  
reason  
why it looks the same no matter what platform you run on, is cause Fox  
does  
all of it’s own drawing for all the controls that it has associated with  
it. I have found many times over, that with this method of drawing  
controls, can lend to be a main cause for bottlenecks in programs  
developed  
in Ruby. Everything is compiled in with the Extension, so you don’t  
need to  
re-distribute a whole bunch of stuff, just a single .so file and a few  
.rb  
files, which makes it a lot easier to port.

wxRuby on the other hand, utilizes Native OS Controls wherever possible,  
only substituting for controls that do not exist on the platform in  
question. It’s very fast, and has very few bottlenecks, cause it’s not  
custom drawing every single control, outside of the main Window. This  
is  
favorable, cause it will retain the user’s preferences for Font size,  
control colors, layout, etc, etc. Also, as with FXRuby, wxRuby has a  
single  
SO File, and a few .rb files, making distrobution easier.

Going between these three toolkits, can be very fustrating when your  
trying  
to develop apps. Do note, that these are my own opinions, and  
experiences  
from using these three Toolkits, and even though I develop soley with  
wxRuby, I encourage people to experiment with other libraries, but only  
pick  
1 toolkit in which to do any programming with, otherwise, it will get  
harder  
and more frustrating in which to do stuff, any other way.

If you have any other questions, please feel free to ask away!  
L8ers,

---

<div class="post-metadata">

**Author:** ![joshualef](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/j/5fc32e/32.png) [@joshualef](https://www.ruby-forum.com/u/joshualef)\
**Post date:** [March 9, 2008, 6:59pm UTC](https://www.ruby-forum.com/t/wxruby-xrc-dialogblock/131055/19 "2008-03-09T18:59:05Z")

</div>

Tim, Mario,

Thanks for your informative input. I think I’ll stick to trying to  
learn wxruby. I will try learning to code everything manually. I’ll  
follow the online tutorials and decipher the examples as best as I can.  
Any other suggestions are greatly appreciated.

---

<div class="post-metadata">

**Author:** ![joshualef](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/j/5fc32e/32.png) [@joshualef](https://www.ruby-forum.com/u/joshualef)\
**Post date:** [March 9, 2008, 6:44pm UTC](https://www.ruby-forum.com/t/wxruby-xrc-dialogblock/131055/20 "2008-03-09T18:44:44Z")

</div>

Mario S. wrote:

> I strongly, very very strongly recommend staying with 1 GUI Toolkit.

I can’t second that enough… 🙂

I came to Ruby/wxRuby from Windows (VB6, .NET), Java , and then Qt3/C++  
development… so I was accustomed to really only having 1 choice for  
the gui toolkit… Well, with Ruby I had many to choose from and it was  
hard to decide at first.

I looked at the Qt bindings for Ruby since I was working with Qt3 at the  
time… I found them to be okay (well, a bit quirky and incomplete on  
the Mac), but I did not want to lock myself into the “GPL or pay”  
licensing scheme that using Qt requires.

I then looked at FOX (no Mac support, somewhat visually unappealing), Tk  
(ugly code _grin_, no Ruby support yet for new, nice looking widgets),  
GTK (spurious errors, deployment headaches)… I was intially avoiding  
wxWindows, thinking it had pretty much run out of steam. However, I am  
glad to find I was wrong. It seems to me to have the best blend of  
features, looks nice on every platform, and it is very easy to deploy  
with a Ruby app via the binary gems…

Oh, yeah, back to my point 🙂 In order to test, I wrote a little app in  
all of the toolkits I evaluated … each got to various stages of  
completion as I hit obstacles or lost interest in subjecting myself to  
the pain encountered in working with them… and by the time I gave  
wxWidgets/wxRuby a go, my head was spinning with so many varied  
approaches to events, naming, threading and so on … I ended up  
struggling more with wxRuby than I might have otherwise… 🙂

All in all, though, my evaluation experiences proved helpful. I am much  
more inclined now to work through any issues I may encounter with wxRuby  
because I know the “grass is not greener” with any other toolkit.

Cheers,  
Tim

[Next page](https://www.ruby-forum.com/t/wxruby-xrc-dialogblock/131055.md?page=2)
