# wxRuby on Snow Leopard 10.6

**URL:** <https://www.ruby-forum.com/t/wxruby-on-snow-leopard-10-6/175803>\
**Category:** wxRuby\
**Created:** [September 20, 2009, 6:38am UTC](https://www.ruby-forum.com/t/wxruby-on-snow-leopard-10-6/175803 "2009-09-20T06:38:25Z")\
**Posts on this page:** 13\
**Page:** 1

<div class="post-metadata">

**Author:** ![mdeering](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/m/278dde/32.png) [@mdeering](https://www.ruby-forum.com/u/mdeering)\
**Post date:** [September 20, 2009, 6:38am UTC](https://www.ruby-forum.com/t/wxruby-on-snow-leopard-10-6/175803/1 "2009-09-20T06:38:25Z")

</div>

I upgraded from Leopard to Snow Leopard and noticed my wxRuby project  
would no longer run. I put more information here, but was told my post  
“seems” to contain spam. More information if requested.

/Library/Ruby/Gems/1.8/gems/wxruby-1.9.3-universal-darwin/lib/wxruby2.bundle:  
dlopen(/Library/Ruby/Gems/1.8/gems/wxruby-1.9.3-universal-darwin/lib/wxruby2.bundle,  
9): no suitable image found. Did find: (LoadError)  
/Library/Ruby/Gems/1.8/gems/wxruby-1.9.3-universal-darwin/lib/wxruby2.bundle:  
no matching architecture in universal wrapper -  
/Library/Ruby/Gems/1.8/gems/wxruby-1.9.3-universal-darwin/lib/wxruby2.bundle

I’ve seen a fix on some blog posts about calling:

sudo env ARCHFLAGS="-arch x86\_64"

before doing a gem install, but this doesn’t seem to help.

Any insight would be greatly appreciated.

Thanks!  
Mike

---

<div class="post-metadata">

**Author:** ![mdeering](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/m/278dde/32.png) [@mdeering](https://www.ruby-forum.com/u/mdeering)\
**Post date:** [September 20, 2009, 8:38am UTC](https://www.ruby-forum.com/t/wxruby-on-snow-leopard-10-6/175803/2 "2009-09-20T08:38:40Z")

</div>

First of all, it looks like the version your trying to run, is wxRuby  
1.9.3,  
which is way out dated, have you tried updating to the latest version,  
2.0.1?

Second, are you running on a 64 bit processor? That’s the only reason  
why  
you would need to define the -arch x86\_64 bit flag, as that is the  
designation for 64 bit processors. If your on a 32 bit processor, then  
this  
should not be needed at all.

And finally, be sure, that if you do update to 2.0.1, that Mac Ports has  
a  
suitable wxMac version of 2.8.10, which it should, since the gem is  
compiled  
against that. So you may need to update to 2.8.10 of wxMac if it’s not  
installed at that version.

If these things don’t help, please feel free to let us know, we prefer  
to  
use the latest version of wxRuby, as more features, and more bugs have  
been  
fixed in these versions, then in the older version, especially from the  
1.9.x series of the core library. It was very experimental builds of  
the  
core library, with many changes. Also make sure you are running on Ruby  
itself at version 1.8.7, or 1.9.2 (Pre-Alpha I believe), as these are  
the  
latest Ruby runtime libraries we link to as well. It’s basically a  
similar  
situation to the wxMac above.

HTH,

Mario

---

<div class="post-metadata">

**Author:** ![mdeering](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/m/278dde/32.png) [@mdeering](https://www.ruby-forum.com/u/mdeering)\
**Post date:** [September 21, 2009, 4:04am UTC](https://www.ruby-forum.com/t/wxruby-on-snow-leopard-10-6/175803/3 "2009-09-21T04:04:44Z")

</div>

Mario S. wrote:

> First of all, it looks like the version your trying to run, is wxRuby  
> 1.9.3,  
> which is way out dated, have you tried updating to the latest version,  
> 2.0.1?

When I do a ‘gem install wxruby’ that’s the version that comes down. I  
did a self-update to rubygems, so I’m at 1.3.5 (from the base Snow  
Leopard comes with 1.3.1)

> Second, are you running on a 64 bit processor? That’s the only reason  
> why  
> you would need to define the -arch x86\_64 bit flag, as that is the  
> designation for 64 bit processors. If your on a 32 bit processor, then  
> this  
> should not be needed at all.

I’m using a MacBook Pro with the Core 2 Duo with Snow Leopard. From  
what I’ve read, 10.5 and up is 64-bit based and this is a 64-bit  
processor.

> And finally, be sure, that if you do update to 2.0.1, that Mac Ports has  
> a  
> suitable wxMac version of 2.8.10, which it should, since the gem is  
> compiled  
> against that. So you may need to update to 2.8.10 of wxMac if it’s not  
> installed at that version.

This may be the source of my problem. I do not have wxMac installed (at  
least as far as I know). I pulled it down, but I’m getting compile  
errors on

libwxtiff-2.8.a, file is not of required architecture  
libwxpng-2.8.a, file is not of required architecture

So, another problem to look at.

> If these things don’t help, please feel free to let us know, we prefer  
> to  
> use the latest version of wxRuby, as more features, and more bugs have  
> been  
> fixed in these versions, then in the older version, especially from the  
> 1.9.x series of the core library. It was very experimental builds of  
> the  
> core library, with many changes. Also make sure you are running on Ruby  
> itself at version 1.8.7, or 1.9.2 (Pre-Alpha I believe), as these are  
> the  
> latest Ruby runtime libraries we link to as well. It’s basically a  
> similar  
> situation to the wxMac above.

It looks likes the version of ruby packaged with Snow Leopard is

ruby 1.8.7 (2008-08-11 patchlevel 72) [universal-darwin10.0]

I’ll keep working on getting wxMac installed, but if there’s anything  
wrong with my setup or approach so far, any pointers would be great.

Thanks!  
Mik

---

<div class="post-metadata">

**Author:** ![mdeering](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/m/278dde/32.png) [@mdeering](https://www.ruby-forum.com/u/mdeering)\
**Post date:** [September 21, 2009, 6:21am UTC](https://www.ruby-forum.com/t/wxruby-on-snow-leopard-10-6/175803/4 "2009-09-21T06:21:07Z")

</div>

Also, after installing the 2.0.1 gem (through rubygems), I receive the  
same error:

/Library/Ruby/Gems/1.8/gems/wxruby-2.0.1-universal-darwin-9/lib/wxruby2.bundle:  
dlopen(/Library/Ruby/Gems/1.8/gems/wxruby-2.0.1-universal-darwin-9/lib/wxruby2.bundle,  
9): no suitable image found. Did find: (LoadError)  
/Library/Ruby/Gems/1.8/gems/wxruby-2.0.1-universal-darwin-9/lib/wxruby2.bundle:  
no matching architecture in universal wrapper -  
/Library/Ruby/Gems/1.8/gems/wxruby-2.0.1-universal-darwin-9/lib/wxruby2.bundle  
from /Library/Ruby/Site/1.8/rubygems/custom\_require.rb:31:in `require' from /Library/Ruby/Gems/1.8/gems/wxruby-2.0.1-universal-darwin-9/lib/wx.rb:12 from /Library/Ruby/Site/1.8/rubygems/custom_require.rb:36:in`gem\_original\_require’  
from /Library/Ruby/Site/1.8/rubygems/custom\_require.rb:36:in `require

---

<div class="post-metadata">

**Author:** ![mdeering](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/m/278dde/32.png) [@mdeering](https://www.ruby-forum.com/u/mdeering)\
**Post date:** [September 23, 2009, 2:04am UTC](https://www.ruby-forum.com/t/wxruby-on-snow-leopard-10-6/175803/5 "2009-09-23T02:04:13Z")

</div>

Michael D. wrote:

> I upgraded from Leopard to Snow Leopard and noticed my wxRuby project  
> would no longer run. I put more information here, but was told my post  
> “seems” to contain spam. More information if requested.
> 
> /Library/Ruby/Gems/1.8/gems/wxruby-1.9.3-universal-darwin/lib/wxruby2.bundle:  
> dlopen(/Library/Ruby/Gems/1.8/gems/wxruby-1.9.3-universal-darwin/lib/wxruby2.bundle,  
> 9): no suitable image found. Did find: (LoadError)  
> /Library/Ruby/Gems/1.8/gems/wxruby-1.9.3-universal-darwin/lib/wxruby2.bundle:  
> no matching architecture in universal wrapper -  
> /Library/Ruby/Gems/1.8/gems/wxruby-1.9.3-universal-darwin/lib/wxruby2.bundle

As you’ve probably realised, the binary gem for Ruby 1.8 and Ruby 1.9 on  
OS Xis built on 10.5 with 10.4 compatibility forced. With the change of  
architectures between 10.5 and 10.6 the links to 32-bit libraries like  
libtiff (where we use the OS X system versions) aren’t valid any more.

I’ll be upgrading to 10.6 myself soon so the next releases should fix  
this compatibility. Until then you could probably just compile your own  
from source - if you have the Developers’ Tools installed for OS X,  
you’ll already have g++, swig (check the version though) and wxWidgets,  
so it shouldn’t need anything more than unpacking the tarball and

rake  
[optional:] strip -x lib/wxruby2.bundle  
rake gem WXRUBY\_VERSION=2.0.1  
sudo gem install wxruby…

cheers  
alex

---

<div class="post-metadata">

**Author:** ![mdeering](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/m/278dde/32.png) [@mdeering](https://www.ruby-forum.com/u/mdeering)\
**Post date:** [September 21, 2009, 9:29am UTC](https://www.ruby-forum.com/t/wxruby-on-snow-leopard-10-6/175803/6 "2009-09-21T09:29:29Z")

</div>

Throwing these two messages together:

On Sun, Sep 20, 2009 at 10:04 PM, Michael D. [removed\_email\_address@domain.invalid](mailto:removed_email_address@domain.invalid)  
wrote:

> When I do a ‘gem install wxruby’ that’s the version that comes down. I  
> did a self-update to rubygems, so I’m at 1.3.5 (from the base Snow  
> Leopard comes with 1.3.1)

You already tried what I was going to suggest next, which is in your  
next  
email, but the solution I probably figured out.

> I’m using a MacBook Pro with the Core 2 Duo with Snow Leopard. From  
> what I’ve read, 10.5 and up is 64-bit based and this is a 64-bit  
> processor.

Ok, I’m just making sure that you are on a x86-64 bit processor. This  
will  
lead into another part below.

> This may be the source of my problem. I do not have wxMac installed (at  
> least as far as I know). I pulled it down, but I’m getting compile  
> errors on
> 
> libwxtiff-2.8.a, file is not of required architecture  
> libwxpng-2.8.a, file is not of required architecture
> 
> So, another problem to look at.

This is probably cause it is looking for libpng, libtiff, instead of  
using  
their built-in replacements, I’ll explain this below.

It looks likes the version of ruby packaged with Snow Leopard is

> ruby 1.8.7 (2008-08-11 patchlevel 72) [universal-darwin10.0]
> 
> I’ll keep working on getting wxMac installed, but if there’s anything  
> wrong with my setup or approach so far, any pointers would be great.

And here is where we get to all of the problems, and didn’t realize it  
till  
now. Your running on version 10.0 of Darwin. All of the gems are  
currently  
built for version 9.0 of Darwin. There being part of the problem. But  
the  
specific problem that you are getting, is from the fact that it can’t  
find  
the wxMac Dynlib’s in order to access the wxWidgets functionality.  
Cause of  
this, wxRuby can’t operate. So we’ll go back up, to the point of  
needing to  
compile wxWidgets and wxRuby in order to get yourself a Installation of  
wxRuby going.

First off, you need to follow the instructions provided here:  
[http://wxruby.rubyforge.org/wiki/wiki.pl?InstallingFromSource](http://wxruby.rubyforge.org/wiki/wiki.pl?InstallingFromSource)

This will allow you to build wxRuby, and wxWidgets. It is detailed for  
all  
the things you need in order to build wxRuby, and as well as  
instructions on  
how to build wxWidgets. I would strongly suggest that you follow these  
instructions, and make sure you are using Swig 1.3.38, as I believe  
that’s  
the version we are currently requiring to build wxRuby.

If you are in need of help with these instructions, please feel free to  
drop  
by the wxRuby chat room, as I am sitting there now. It is located on  
irc://  
[irc.freenode.net/#wxruby](http://irc.freenode.net/#wxruby) And if you are able to get a build of wxRuby  
for  
Darwin 10, may I please suggest that you offer it back to us, so that we  
can  
add it to the release, so we have covered another platform?

Thanks,

---

<div class="post-metadata">

**Author:** ![mdeering](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/m/278dde/32.png) [@mdeering](https://www.ruby-forum.com/u/mdeering)\
**Post date:** [October 3, 2009, 6:04am UTC](https://www.ruby-forum.com/t/wxruby-on-snow-leopard-10-6/175803/7 "2009-10-03T06:04:55Z")

</div>

Any update to getting this to work. I have the same problem. In snow  
leopard, I tried this:

$ sudo gem install wxruby

and I get this

/Library/Ruby/Gems/1.8/gems/wxruby-1.9.3-universal-darwin/lib/wxruby2.bundle:  
dlopen(/Library/Ruby/Gems/1.8/gems/wxruby-1.9.3-universal-darwin/lib/wxruby2.bundle,  
9): no suitable image found. Did find: (LoadError)  
/Library/Ruby/Gems/1.8/gems/wxruby-1.9.3-universal-darwin/lib/wxruby2.bundle:  
no matching architecture in universal wrapper -  
/Library/Ruby/Gems/1.8/gems/wxruby-1.9.3-universal-darwin/lib/wxruby2.bundle

which among others makes me curious why v. 1.9.3 is the default  
installed even though it is an outdated version.

---

<div class="post-metadata">

**Author:** ![mdeering](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/m/278dde/32.png) [@mdeering](https://www.ruby-forum.com/u/mdeering)\
**Post date:** [September 23, 2009, 2:54am UTC](https://www.ruby-forum.com/t/wxruby-on-snow-leopard-10-6/175803/8 "2009-09-23T02:54:35Z")

</div>

Me and Mike, and another person have been working on this, and I will be  
sending an email to the Developer’s list in a moment in regards to our  
failure with that, as well as some patches for the OS X 10.6 stuff.

L8ers,

Mario

---

<div class="post-metadata">

**Author:** ![mdeering](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/m/278dde/32.png) [@mdeering](https://www.ruby-forum.com/u/mdeering)\
**Post date:** [October 4, 2009, 3:57am UTC](https://www.ruby-forum.com/t/wxruby-on-snow-leopard-10-6/175803/9 "2009-10-04T03:57:46Z")

</div>

Nathan E. wrote:

> Any update to getting this to work. I have the same problem. In snow  
> leopard, I tried this:
> 
> $ sudo gem install wxruby
> 
> and I get this
> 
> /Library/Ruby/Gems/1.8/gems/wxruby-1.9.3-universal-darwin/lib/wxruby2.bundle:  
> dlopen(/Library/Ruby/Gems/1.8/gems/wxruby-1.9.3-universal-darwin/lib/wxruby2.bundle,  
> 9): no suitable image found. Did find: (LoadError)  
> /Library/Ruby/Gems/1.8/gems/wxruby-1.9.3-universal-darwin/lib/wxruby2.bundle:  
> no matching architecture in universal wrapper -  
> /Library/Ruby/Gems/1.8/gems/wxruby-1.9.3-universal-darwin/lib/wxruby2.bundle
> 
> which among others makes me curious why v. 1.9.3 is the default  
> installed even though it is an outdated version.

I haven’t had any success. After trying to compile the dependencies  
needed to compile the wxRuby source (and failing at many points) I  
eventually gave up. I’m hoping that someone with a bit more Mac  
experience may come along and help out, but until then I fear we’re out  
of luck.

Mike

---

<div class="post-metadata">

**Author:** ![mdeering](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/m/278dde/32.png) [@mdeering](https://www.ruby-forum.com/u/mdeering)\
**Post date:** [October 5, 2009, 3:17pm UTC](https://www.ruby-forum.com/t/wxruby-on-snow-leopard-10-6/175803/10 "2009-10-05T15:17:22Z")

</div>

Michael D. wrote:

> I haven’t had any success. After trying to compile the dependencies  
> needed to compile the wxRuby source (and failing at many points) I  
> eventually gave up.

If you have the Mac Developer Tools installed, I don’t think there  
should be any dependencies - wxWidgets, Ruby and SWIG should already be  
installed. Unless, possibly the version of SWIG isn’t compatible.

> I’m hoping that someone with a bit more Mac  
> experience may come along and help out, but until then I fear we’re out  
> of luck.

I’m going to upgrade to 10.6 in the near future so will be looking at  
this shortly.

alex

---

<div class="post-metadata">

**Author:** ![mdeering](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/m/278dde/32.png) [@mdeering](https://www.ruby-forum.com/u/mdeering)\
**Post date:** [October 5, 2009, 3:17pm UTC](https://www.ruby-forum.com/t/wxruby-on-snow-leopard-10-6/175803/11 "2009-10-05T15:17:22Z")

</div>

Nathan E. wrote:

> /Library/Ruby/Gems/1.8/gems/wxruby-1.9.3-universal-darwin/lib/wxruby2.bundle:  
> no matching architecture in universal wrapper -  
> /Library/Ruby/Gems/1.8/gems/wxruby-1.9.3-universal-darwin/lib/wxruby2.bundle
> 
> which among others makes me curious why v. 1.9.3 is the default  
> installed even though it is an outdated version.

I don’t know why Rubygems does this sometimes, but the remote install  
fails to find the correct version. If this happens download the latest  
gem version from file download page on Rubyforge and call sudo gem  
install wxruby in the same directory as the downloaded file, or instead  
of ‘wxruby’ give the file path.

But this probably won’t work because we have only built on 32-bit arch  
for OS X, using 10.5

alex

---

<div class="post-metadata">

**Author:** ![mdeering](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/m/278dde/32.png) [@mdeering](https://www.ruby-forum.com/u/mdeering)\
**Post date:** [October 6, 2009, 9:22am UTC](https://www.ruby-forum.com/t/wxruby-on-snow-leopard-10-6/175803/12 "2009-10-06T09:22:28Z")

</div>

Thanks for the update guys. Yea, I actually did end up manually  
downloading the latest version from the rubyforge site and trying to  
install it that way with the result being the same error but for the new  
version.

LoadError:  
dlopen(/Library/Ruby/Gems/1.8/gems/wxruby-2.0.1-universal-darwin-9/lib/wxruby2.bundle,  
9): no suitable image found. Did find:  
/Library/Ruby/Gems/1.8/gems/wxruby-2.0.1-universal-darwin-9/lib/wxruby2.bundle:  
no matching architecture in universal wrapper -  
/Library/Ruby/Gems/1.8/gems/wxruby-2.0.1-universal-darwin-9/lib/wxruby2.bundle

There should be a way around this, at the very least as an alternative,  
consider pushing the gem to [gemcutter.org](http://gemcutter.org) which is as simple as gem  
publishing can get and it almost certainly won’t have this version  
problem. Then the gem can be installed with

$ gem install wxruby --source [http://gemcutter.org](http://gemcutter.org)

---

<div class="post-metadata">

**Author:** ![mdeering](https://www.ruby-forum.com/letter_avatar_proxy/v4/letter/m/278dde/32.png) [@mdeering](https://www.ruby-forum.com/u/mdeering)\
**Post date:** [October 21, 2009, 2:42pm UTC](https://www.ruby-forum.com/t/wxruby-on-snow-leopard-10-6/175803/13 "2009-10-21T14:42:19Z")

</div>

Alex F. wrote:

> I don’t know why Rubygems does this sometimes, but the remote install  
> fails to find the correct version.

Judging by the listing at [http://gemcutter.org](http://gemcutter.org), the platform string for  
v1.9.3 does not specify a darwin version, it is only  
“universal-darwin”[1]. Subsequent gems specify “universal-darwin-9”.  
Since Snow Leopard’s platform string is “universal-darwin-10”[2] v1.9.3  
matches Snow Leopard[3] and it will be selected for installation.

I just ran in to this problem with the wxruby gem too. I’m fairly new to  
ruby and gems, so I did the research above to try to understand what was  
going on. Hopefully it is not too obvious and can help someone.

I’m hoping for a gem for darwin-10 soon too.

Cheers,  
Dave Cameron

[1] [RubyGems.org | your community gem host](http://gemcutter.org/gems/wxruby/versions)  
[2] you can check this by running `gem environment`  
[3] matching is explained in `gem help platforms`
